MustangWorks.com : Ford Forums - View Single Post

Yan88gt · 11-10-2002, 03:42 PM

The speed shop owner is a moron. He have a beaumont that he invested 70 000$ on it and he only run 10 flat. I don't want( and i will not) to change my cam cause it work well on my stock speed density computer and i can't go bigger ( i also have 24# injectors and it make the cam selection harder). I'm on a budget and i had the entire motor out of a wreked explorer for 75$( the intake was missing and the motor need new rings and bearings due to bad storage) I recently put 1 5/8 longtube on my car with h-pipe and i'm waiting for my aluminium flywheel.

11-10-2002, 03:42 PM	#14
Yan88gt Registered Member Join Date: Jun 2001 Location: Quebec canada Posts: 92	The speed shop owner is a moron. He have a beaumont that he invested 70 000$ on it and he only run 10 flat. I don't want( and i will not) to change my cam cause it work well on my stock speed density computer and i can't go bigger ( i also have 24# injectors and it make the cam selection harder). I'm on a budget and i had the entire motor out of a wreked explorer for 75$( the intake was missing and the motor need new rings and bearings due to bad storage) I recently put 1 5/8 longtube on my car with h-pipe and i'm waiting for my aluminium flywheel. __________________ Ported stock heads and intake, 65mm throttle body, 1.7 roller rockers, pulley, superchip,afpr, electric fan, motorsport headers, magnaflow cat-back, hurst shifter, 3.55 gear, speed density computer 12.81@ 104.7 on E.T street (1.77)