deff get some gears, unless you want power, then ide go heads cam intake.. heres my ex..: i was turning 13.3s with 2.2- 2.3 60ft and 308 gears... when i just added my 373s on my very 1st run with them, i cut a 2.000 and ran a 12.85. gears are going to get you out the hole faster imo. specially with a DR. i use nittos. hope this helps.
Vinny
__________________
1993 5.0 mustang coupe
cobra upper and lower intake, TFS TW Alum. heads, TF 1.6 Roller rockers, TF stage one cam, mac 70 mm T/B, 76 C&L Air meter, FMS 24lb in. steeda pullies, Tremec 3550, FMS 373 gears, FPR, white face gauges, pro 5.0 shifter, 3 chamber flowmasters, Offroad h-pipe, Mac headers, Centerfource cluch, steeda clutch quadrant and cable, saleen wing, walbro 155 fuel pump, Eibach lowering springs 1 7/8", M.U. Sub-frames.
Track Times:
Lebonon Valley:
before heads/cam 13.76 @ 101.74 60ft - 2.24 after but before gears - 13.26 @106.66 with 2.166 60'
EnglishTown before gears - 2.34 60ft - 13.35 @108.12
Etown after - 12.851 @108.19 2.000 60ft
|