Re: What are stock pushrod length on a 5.0 motor
85-96 5.0s are 6.272"
79-85 5.0s are 6.904"
Comp cams has a set that's 6.250" for roller cams and 6.876" for flat tappet cams.
Be carefull, if you go too big a pushrod you mess up the whole geometry and the valves will not fully close.
Hope this helps....
__________________
95 GT convertable, ported+polished GT40 heads, port matched upper and lower Cobra intake manifold, Flowthech headers, Catco hi-flow h-pipe with 2 hi-flow cats, Mac true fit catback exhaust, 3.73 gears, underdrive pullies, Edelbrock 70mm throttle body, Mac cold air intake, FMS 24lb injectors, Granatelli 75mm mass air
|