Re: GT40P heads and 1.7 rockers ?
I used the stock valve covers but I had to take out the baffle for the oil fill and grind down the mounting area for the baffle with a dremel tool. Took about 5 minutes or so. You may get by with just taking out the baffle though. You'll have to check push rod length when you assemble the motor, each one is different, I used the stock pushrods with no shims under the rocker arms.
__________________
89GT,Pro-Bullet 306, H/C/I and a bunch of other stuff. * Sold*
00GT, Vortech S-Trim, Steeda Boost Pipe, C&L intake, Mac off-road H-pipe, Flowmasters, B&M Ripper shifter, Eibach Sportline springs, Koni Struts/shocks, MM full length subframe connectors, Cobra brakes, 3.73's.
My Car Domain Page
|