I officially hate the driver's side shackle area. Not enough room to line the bolt up with the frame and the top of the shackle. I had to punch a hole in the inner quarter panel in order to get this bolt in. Pain in the ass.
If I'd been using rubber bushings, I'd probably have been able to insert the bushing/sleeve/bolt as a unit, but the polyurethane bushing was just too stiff for this. I know most of the regs probably know this already, but in case a relative newbie like me is reading this topic, be aware of bad times in this area.
Almost done...almost done... *rocks back and forth*