Thread: gt40 vs gt40p
View Single Post
Old 10-06-2008, 02:00 PM   #8
goodyear1984
Registered Member
 
Join Date: Dec 2006
Location: new york
Posts: 482
Default Re: gt40 vs gt40p

lets get one thing straight the stock bottomend will hold 6500 all day long the flywheel (manual) would only break at 6500 it it had stress cracks.cooling system mines stockother than a electric fan,transmission(t5) no problems mine lasted half the summer with over 500hp goin tru it,Dont under estimate a 302 they take a beating.its simple dont waste much money on gt40 heads.go with 165 afr a rpm preformer intake and a decent cam.then a 100 on a fuel pump and 200 a set of 24lb injectors.u aint gonn flow enough air tru a set of untouched gt40 heads to make 320 hp.with the gt40 and a intake ud be luckey toget 265hp.if thats what ur looking for thengoit if u wanna make over 300 then save ur money and get some aluminum heads intake cam.u will pick up power just on the cr gain
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters
^best et so far 11.6 1.61 60ft coming soon 9sec et's
1992 mustang gt
2001 gmc 1500 4x4
78 century boat
92 skidoo
goodyear1984 is offline   Reply With Quote