[goodyear1984]

Originally Posted by goodyear1984

im deff with usmc on this .i didnt read every ones post but the stock e7 heads are junk.the ports are small and the valves are small.the stock cam is small,the intake has small long runners which are good for bottom end power.if you put an intake on a on a stock set of heads you really wont see a gain,if u put a cam in a stock motor u wont notice much eaither.i ported a set of e7 heads with a b cam,1.7 rockers,edelbrock performer intake,373 gears,stock headers,bassani x pipe and flowmasters and a 150shot of spray and ran 11.8's. but the amount of time it takes port them or if u dont know how to port them the money you would waste for what u get is not worth it.basically between heads, intake,camshaft none of it works that good as far as performance,they work good togeather but,if u change the heads ur gonna want a cam and intake to match the flow of the heads .if every thing doesnt work togeather you wont get the full potential of the motor..any ways the biggest gain you willl recive on a stock motor will be a set of aluminum heads.the order i would put them in is : heads,cam,intake

ps the 11.8 i ran with that motor was in my hatch,my car has every thing from a/c to the stock suspension,plus the sound system adds 100 pounds in weight.you can shave off alot of weight and add a drag suspension and take off a good amount of et time.