View Single Post
Old 02-02-2012, 01:11 AM   #1 (permalink)
skiwesser
Registered Member
 
skiwesser's Avatar
 
Join Date: Sep 2000
Location: rock hill,S.C. 29730
Posts: 420
Default Help with nitrous please

I haven't sprayed new motor at all so system hasn't been activated

in about 6 1/2 yrs. Went to spray what amounts to an 87 shot (I

forget actual jet sizes) anyway it acted like the Nos solenoid didn't

open (popped and missed, "stumbled"). So I unhooked the solenoids

and they both clicked when I put power to them(both ohmed out

the same so I tried powering them). Now it seems to be getting

nitrous because it pulls, but still misses and stumbles bad(like it's

not getting enough nitrous). I unhooked all lines anb blew them out,

blew out nozzle, checked jets and screen filter on inlet side of

solenoid. Still same?? I'm kinda new at nitrous but I understand it,

got plenty of bottle pressure, system works (I'm confiedent it's

getting some nos now) can the solenoid be not opening all the way?

I thought it was open or closed, and if stuck or broke it wouldn'd

open at all right? It's a wet system with one nozzle in intake elbow.

Any help is GREATLY APPRECIEATED!! Sorry so long.

Thanks
Wes
__________________
88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306.

DYNO TUNED TO 300.97 RWHP 337RWTQ
skiwesser is offline   Reply With Quote