Fox Body
02-19-2001, 07:35 PM
Well, here are the times and the problems.
Track times
Run 1* Run 3** Run 4** Run 5**
RT +.727 +.423 +.615 +.492
60ft 2.137 2.180 2.233 2.216
1/8ET @ mph 9.063/77.12 9.109/77.63 9.268/76.43 9.244/77.24
1/4ET @ mph 14.142/96.18 14.147/97.06 14.399/95.27 14.320/96.20
--- Runs 1 and 4, engine hesitates http://www.mustangworks.com/interactive/msgboard/mad.gif
--- Runs 2 and 6 were total screw ups on my part. http://www.mustangworks.com/interactive/msgboard/redface.gif
--- Runs 3 and 5, launched at about 15-1700 rpm, no stalling/engine hesitation (okay, going in the right direction).
*Timing @ ~20 degrees
**Timing set to ~14 degrees
My evaluation as to what's keeping me from getting into the 13s and how to fix it.
3) NOT ENOUGH TRACTION. A friend of mine with a '91 GT had some Mickey Thompsons and he was hooking WAY better than I was. The thing is, I feel that I should still be in the high 13s with the tires I have now.(?) Also, I want to keep my car the same way as I drive it on the road (ie, no front sway bar removed, no slicks, etc.)
2) ENGINE STALLS/HESITATIONS. I found a way to correct this by launching @ ~1500rpm. But, it shouldn't hesitate in the first place (yeah, maybe the carb's too big).
1) DRIVER ERROR. I definately gotta practice. By the 3rd run, I decided to manually shift the C4 @ 5600- 5800 rpm and it helped a bunch. I just kept screwin up on my launches.
If anything, at least I can say that I achieved the fastest quarter mile times that I have ever run with this car:
14.142 and 14.147 beat the earlier champion run of 14.161 1/4 mile ET (w/ the 3.27 gears), but that's not nearly good enough.
So, going back to the strip this coming Sunday. I'll see what I can do.
http://www.mustangworks.com/interactive/msgboard/frown.gifPlease excuse the length of this post, but being the Chemistry major that I am, I gotta analyze everything.
If anyone has anymore input/advice, enlighten me please.
"because, no one’s really gonna be free until nerd persecution ends." ---Revenge of the Nerds
-------------------------------
'79 Mustang Coup
4" Cowl
Weld wheels (15x6;15x8)
Stock 5.8L
C4 w/ shift kit
1.5" MAC full length headers
Holley 750 CFM
Edelbrock intake
2.5" Off road H-pipe, 2-chamber Flowmasters
8.8" Rear end w/ 3.55:1 gears (Now that's more like it!!) http://www.mustangworks.com/interactive/msgboard/biggrin.gif
Front: 225/60/15 Rear: 255/60/15 Eagle GT II
14 x 4" K&N air filter (getting the Xtreme setup soon) http://www.mustangworks.com/interactive/msgboard/cool.gif
[This message has been edited by Fox Body (edited 02-19-2001).]
Track times
Run 1* Run 3** Run 4** Run 5**
RT +.727 +.423 +.615 +.492
60ft 2.137 2.180 2.233 2.216
1/8ET @ mph 9.063/77.12 9.109/77.63 9.268/76.43 9.244/77.24
1/4ET @ mph 14.142/96.18 14.147/97.06 14.399/95.27 14.320/96.20
--- Runs 1 and 4, engine hesitates http://www.mustangworks.com/interactive/msgboard/mad.gif
--- Runs 2 and 6 were total screw ups on my part. http://www.mustangworks.com/interactive/msgboard/redface.gif
--- Runs 3 and 5, launched at about 15-1700 rpm, no stalling/engine hesitation (okay, going in the right direction).
*Timing @ ~20 degrees
**Timing set to ~14 degrees
My evaluation as to what's keeping me from getting into the 13s and how to fix it.
3) NOT ENOUGH TRACTION. A friend of mine with a '91 GT had some Mickey Thompsons and he was hooking WAY better than I was. The thing is, I feel that I should still be in the high 13s with the tires I have now.(?) Also, I want to keep my car the same way as I drive it on the road (ie, no front sway bar removed, no slicks, etc.)
2) ENGINE STALLS/HESITATIONS. I found a way to correct this by launching @ ~1500rpm. But, it shouldn't hesitate in the first place (yeah, maybe the carb's too big).
1) DRIVER ERROR. I definately gotta practice. By the 3rd run, I decided to manually shift the C4 @ 5600- 5800 rpm and it helped a bunch. I just kept screwin up on my launches.
If anything, at least I can say that I achieved the fastest quarter mile times that I have ever run with this car:
14.142 and 14.147 beat the earlier champion run of 14.161 1/4 mile ET (w/ the 3.27 gears), but that's not nearly good enough.
So, going back to the strip this coming Sunday. I'll see what I can do.
http://www.mustangworks.com/interactive/msgboard/frown.gifPlease excuse the length of this post, but being the Chemistry major that I am, I gotta analyze everything.
If anyone has anymore input/advice, enlighten me please.
"because, no one’s really gonna be free until nerd persecution ends." ---Revenge of the Nerds
-------------------------------
'79 Mustang Coup
4" Cowl
Weld wheels (15x6;15x8)
Stock 5.8L
C4 w/ shift kit
1.5" MAC full length headers
Holley 750 CFM
Edelbrock intake
2.5" Off road H-pipe, 2-chamber Flowmasters
8.8" Rear end w/ 3.55:1 gears (Now that's more like it!!) http://www.mustangworks.com/interactive/msgboard/biggrin.gif
Front: 225/60/15 Rear: 255/60/15 Eagle GT II
14 x 4" K&N air filter (getting the Xtreme setup soon) http://www.mustangworks.com/interactive/msgboard/cool.gif
[This message has been edited by Fox Body (edited 02-19-2001).]