View Full Version : Dynamax vs. Flowmaster?
white00GT
04-22-2001, 01:33 PM
I'm about to get some new mufflers and was looking at the Dynamax Ultra Flows does anyone know how they compair to the flowmaster 40's? I'm about sick and tired of my 50's and want something louder but in the straight through design to go with my X-pipe. Does anyone know how much louder the ultra flows are than the 40's or the 50's? Also does anyone know anything about the MAC Pro dumps compaired to the other two? Thanks for the help.
Monty
------------------
2000 Mustang GT (http://www.mustangworks.com/cgi-bin/moi-display.cgi?1313)
97snakedriver
04-22-2001, 02:52 PM
I have Ultra Flows with a Bassani X-pipe. It sounds cool at higher RPMs, but are pretty quiet at idle and low RPMs.
95GTS
04-22-2001, 06:30 PM
Plus the Flowmaster 40 series are not straight flow thru. Look into the Magnaflow mufflers. They are straight flow thru. I have Magnaflow on my Lightning and it sounds great, though I've got an off road h-pipe and not the X. Very deep, low exhaust tone.
------------------
1994 Red SVT Lightning #2019 (http://www.mustangworks.com/cgi-bin/moi-display.cgi?388)
white00GT
04-22-2001, 09:11 PM
Thanks for the info, but I guess that I sould say that I'm trying to find something that sounds close to a H-pipe 40 series combo. Does anyone know of anything that would sound close to that combo with an X-pipe? I love the sound of an H with 40's, but I don't want to give up the X.
------------------
2000 Mustang GT (http://www.mustangworks.com/cgi-bin/moi-display.cgi?1313)
46stang
04-24-2001, 04:47 PM
it'll never sound like the h pipe because the x changes the sound. if you want louder get the 40 series. bassani actually recommends the flow through muff.(dynomax type) for best perf.though. I have the ultra flows and really enjoy them. they are on the quiet side but they do have a real nice sound when you get on it though. i like them more than flows, especially when you don't have to turn the stereo up 3/4 of the way to here it as is nec. with flows.jmo.
------------------
96 stang,ported 99 heads, 99 intake, 99 cams,Steeda power pullies,Kirban adj.reg.,Pro-m 87,24#inj.,70mm t/b,Bassani x-pipe w/cats, Dynomax ultraflow catback,iat mod, home depot ram air, k@n,373's,cobra brakes,fms spings, tri-ax shifter.
white00GT
04-24-2001, 06:09 PM
Well if the Dynomax Ultra Flows are on the quiet side. Who makes the loudest Flow through type muffler? I thought the dynomax utlra flows were the loudest. I'm looking to try and get something as equal too or a little louder than the 40's by flowmaster. I don't wont to get the 40's because they arn't flow through. Is the Dynomax ultra flow the loudest that I'm going to get or are there louder?
------------------
2000 Mustang GT (http://www.mustangworks.com/cgi-bin/moi-display.cgi?1313)
[This message has been edited by white00GT (edited 04-24-2001).]
white00GT
04-24-2001, 10:56 PM
I was just looking through Jeg's and saw that they have two different Ultra Flow mufflers listed. On is the Ultra Flow Weld and the other is the Ultra Flow SS. What is the diff. between the two? Also which muffler is the loudest from dynomax; The super Turbo, the ultra flow SS or the ultra flo weld?
------------------
2000 Mustang GT (http://www.mustangworks.com/cgi-bin/moi-display.cgi?1313)
46stang
04-25-2001, 12:07 AM
the super turbos are similar to 3 chamber flows, ultra ss are stainless steel(real pretty)they are held together with a bead(like a reg. muff.) the last one is welded together like a flow. the insides are the same(ss & welded) as far as i know though. I think the last one is the loudest of the 3, but not positive.(welded)
p.s. the super turbo is not a flow through.
I think borla is flow through and maybe bassani, but can't remember. maybe some one else will?
------------------
96 stang,ported 99 heads, 99 intake, 99 cams,Steeda power pullies,Kirban adj.reg.,Pro-m 87,24#inj.,70mm t/b,Bassani x-pipe w/cats, Dynomax ultraflow catback,iat mod, home depot ram air, k@n,373's,cobra brakes,fms spings, tri-ax shifter.
white00GT
04-25-2001, 02:41 PM
Thanks 46stang that explains the price diff. between the utra flo SS and the ulta flo weld (59.99 vs. 139.99). I was looking at them both trying to figure out what could cause the price diff, but if one is stainless and the other is Al then that makes sense. I think I'm going to go with the welds. http://www.mustangworks.com/msgboard/biggrin.gif
Thanks for the help.
------------------
2000 Mustang GT (http://www.mustangworks.com/cgi-bin/moi-display.cgi?1313)
[This message has been edited by white00GT (edited 04-25-2001).]
91LX2Bfast
04-25-2001, 03:12 PM
I had a Bassani offroad X-pipe and 40 series Flows on my Stang and the sound was nothing short of awesome. Up to 2750 rpm, it sounds just like a H-pipe, but when the revs get abouve 3000, you really start to hear the difference between an X and a H.
------------------
2001 SVT Lightning (red): Many mods to come- Let the Vette killer begin to take shape
1997 Thunderbird 4.6L: Dynomax exhaust, Lightning 80mm MAF, Accufab MAF adapter, 7" powerstack cone filter, B&M 24,000GVW trans cooler, Inject-Tech chip, many more to come...15.2 @ 91. Not bad for a 3800lb auto 4.6L
No Longer own: 91 LX 5.0L 5 spd
wi_wrestler
04-30-2001, 01:14 PM
i just got the force II cat back system from flowmaster and its toooo quiet on a 88 GT I love this car
it goes a lil faster though and runs smoother because b4 i had holes in my mufflersand it was way to loud, but now its too quiet does a h pipe make it louderand headers ?
13sec95vert
05-05-2001, 04:42 PM
just throw a borla catback on it its by far the best. My car is unbelievably loud with an off road h-pipe and borla. I get many compliments about the way my car sounds
------------------
1995 gt convertible:
3.55 gears, underdrive pulleys, cobra intake , fenderwell cold air, 65mm throttle body, 75mm mass air meter, off-road h pipe, borla cat back, custom diablo chip, 155lph fuel pump lentech aode street terminator w/ 10" converter stalls at 2800 rpms, yokohama a520(drag radials) 275s
white00GT
05-06-2001, 10:58 PM
I've only heard one set of borlas. They were on a '99 Cobra with an x/ pipe. The car had this annoying buzz or hum to it. I could stand it, does your car have anything like that or could it of just been this one car?
------------------
2000 Mustang GT (http://www.mustangworks.com/cgi-bin/moi-display.cgi?1313)
King Snake
05-07-2001, 11:35 AM
Are you sure it wasn't a supercharger? http://www.mustangworks.com/msgboard/biggrin.gif
white00GT
05-07-2001, 03:24 PM
Originally posted by King Snake:
Are you sure it wasn't a supercharger? http://www.mustangworks.com/msgboard/biggrin.gif
ROFLMAO!!!!..Yep I'm positive it wasn't a blower.lol. When I first heard the car is sounded pretty good at idle but when he pulled off it had this annoying buzz/hum. It was in the exh, the deep rumble went away and all you heard was this drone. I personaly hate that buzz/hum/drone sound, I'm looking for a nice deep mellow rumble.
------------------
2000 Mustang GT (http://www.mustangworks.com/cgi-bin/moi-display.cgi?1313)