View Full Version : Steering binding - Help !!
Mustang_289
03-03-2002, 07:43 AM
The steering linkage was binding up pretty bad when turning almost to the point where it almost feels locked. We just replaced the steering rack - as the seals were bad - and powersteering fluid was leaking. After we removed it and put a new one on, most of the binding cleared up but we've still got a little bit.
Anyone on this BBS a front-end guy? Any suggestions will be appreciated. Thanx in advance
Big Bopper
03-03-2002, 02:59 PM
My car did the same thing. I had my buddy at a front end shop fix it. I'll call him and find out what it exactly was. Check the site tonight......:D
Mustang_289
03-04-2002, 06:51 AM
Thanx - I'll check back tonight!
Mustang_289
03-05-2002, 05:44 PM
Hey Big Bopper - did you have any luck with checking with your budy who fixed your binding with your stang?
richd
03-05-2002, 07:08 PM
A friend of mine changed one of the high pressure power steering hoses on his '89 Prelude. After replacing it the steering would get really tight for a split second while turning. He was told to fill the pump with fluid and do a bunch of lock to lock turns to get the air bubbles out. After doing that a bunch of times the steering became much smoother.
Sounds like you might have the same problem.
Good luck,
Rich D.
Big Bopper
03-05-2002, 07:13 PM
Mustang 289.... After some sweet talking my buddy,.. I found out that all he did to fix mine was put more fluid in it and went lock to lock a bunch of times.....I guess thats why it just cost me a 12 Beer!!!!
Good luck Eh!
Mustang_289
03-06-2002, 07:24 AM
Does this mean I owe you a 6 pack of brew?
Thanx for the help guys - we'll check this out ASAP. This
project car that my son and I are working on is coming along
good. We've got most of the little nagging mechanical problems out of the way and when we do, we'll start looking at other
mods, clean-up, and new paint job.