View Full Version : GT40 Iron heads?
where is the best place to get them and the cheapest? i hear alot about the GT40 iron heads. i am interested in a set. any suggestions?
fiveohpatrol
03-31-2002, 03:40 PM
well the normal iron GT40 heads are no longer being produced so the best place to find them is either in a classifieds section or your best bet is to scour eBay for them. They're also normally a pretty popular item at swap meets.
If you are willing to buy a new set of headers, the GT40P heads are going for a pretty good price. Summit has started carrying them completely assembled for like $540 a pair. You'll have to get a set of motorsport headers though because the spark plug is at a different angle.
hope this helps
-Drew
avbcon12
03-31-2002, 07:12 PM
i got my set of GT-40 heads off the classifieds.... i have since put them in along with a lot of other items and cant beleive the difference!!! DO IT!! you wont regret it...
take care,
adam
4.6l-eatr
03-31-2002, 07:27 PM
What year and type of vehicles did they come on? Maybe you could find some still in a car at a junk yard! Just a thought!
avbcon12
03-31-2002, 08:09 PM
they came on cobras and lightnings as well as some boats. mine were from a 351 marine application.
the cobra heads im sure are 64cc combustion chambers and the lightnings are i think 65cc or so since they are a 351w motor... the lightning heads also come with 1/2" bolt holes compared to the mustangs 7/16".
hope this helps, it will be a real tough time trying to find them in a junkyard. i tried.
take care,
adam
Unit 5302
03-31-2002, 08:26 PM
The GT40 Irons had 65.5cc combustion chambers that will drop your compression ratio from 8.9:1 to 8.75:1. The irons flow a little less than the GT40P's, about 185-190cfm intake, and about 130cfm exhaust.
A solid head, if you pick it up for under $400. Otherwise, getting a new set of GT40P's for $500, then adding the headers is probably the way I would go. Oh, and I'd also have the irons decked for some actual compression.
Tomzilla
04-02-2002, 03:32 AM
Originally posted by avbcon12
the lightning heads also come with 1/2" bolt holes compared to the mustangs 7/16".
Not completely accurate as my heads came off a 94 Cobra and they had 1/2" bolt holes.:D
PKRWUD
04-02-2002, 05:24 AM
FWIW, the GT-40P heads have both smaller exhaust valves and smaller combustion chambers, than the regular GT-40 heads.
Take care,
-Chris
avbcon12
04-02-2002, 08:29 AM
http://www.geocities.com/MotorCity/Pit/5755/gt40p.html
adam