Fuel Cut Off Switch

[RB92GT]

Hi everyone,
I need to install a fuel cut off switch on my 1992 GT. I read the tech article on the Corral, but that article describes the install on a SN-95 platform, not the Fox body stang. Can anyone help me out with this. For example, do I need to remove the drivers seat to get to the relay wiring, or is the wiring under the kickpanel on the drivers side? Also, is the correct wire to splice the switch into Black and red, or green and yellow, I have heard conflicting info about this.
Thanks,
Ryan

[chris91LX]

It makes it about 1000 times easier if you pull out the drivers seat, it's only four bolts and takes all of 2 minutes. I believe I spliced into the red wire, but I am not 100% sure on that. Just cut the wire, splice a new wire into each side and put a switch between them.

[PKRWUD]

Exactly.

Take care,
-Chris