are high 11s possible?

[StripedStangLX]

I'm finishing up my new Keith Craft prepped 306 w/ JE SRP flat top pistons. It has TFS track heat heads, TFS street intake, TFS stage 1 cam w/ 1.7 roller rockers (224*/232* duration @ .050, .542"/.563" lift 112* lobe seperation), BBK 1 5/8" long tube headers w/ offroad h-pipe, flowmasters, underdrive pulleys. The car has a t-5 tranny with a motorsport hd clutch, 3:73 gears and a detroit locker. Also the air conditioning and smog pump is removed. No port work is done on the heads or intake. I will be getting the car dyno-tuned at second street speed in perkasie, pa. Are 11s at all possible? If not what do you think the car can run? Also what kind of power will i be making at the wheels. Thanks for your help!

[cyberstang5.0]

Yeah, if you get a good set of slicks, I think you can break in the 11's. It will be very tough though. I think low-mid 12's might be more accurate.

[Dark_5.0]

Originally posted by cyberstang5.0
Yeah, if you get a good set of slicks, I think you can break in the 11's. It will be very tough though. I think low-mid 12's might be more accurate.

I agree. Unless your car is really light.

Later,

[lx mike]

Originally posted by cyberstang5.0
I think low-mid 12's might be more accurate.

my thoughts exactly, get the heads and intake ported and will be very close to 11's

[USMC302]

I hit a 12.4 with the notch but didn't launch that high and needed to let more air out of the tires. I think 11.90's are coming very very soon and so is a bigger mass air. Good luck and let us know.

[USMC302]

oops, forgot to answer you question. Do you have bigger TB and mass air? What size are the injectors? Do you have a computer chip? Be more specific about the app. I think low 12's are in order.

[88workcar]

I have only three words for you buddie! YES YOU CAN. Good luck Jason

[StripedStangLX]

Originally posted by USMC302
Do you have bigger TB and mass air? What size are the injectors? Do you have a computer chip? Be more specific about the app.

Right now it has the stock TB but i am planning on getting a 70mm. The mass air is a 75mm Pro-M Bullet calibarated for 24# injectors. I am also going to get a federwell cold air kit. I am planning on putting in the motor tomorrow so i will let you guys know how it goes.

[sn95mustang347]

my friend had a similar set up, but he only had a .500 lift cam (class max). he did a 12.3 at 3200ft with the car leaning out. with better air and bigger injectors im sure he can hit mid 11s