rear end

werked 66 · 04-07-2002, 11:50 AM

i amm looking to get a full bolt in rear end posi . does anyone know where i can find one of these for a good price . i need all the help i can get.

thanks werked 66

jwboner · 04-08-2002, 01:51 AM

Currie sells complete and individual rear end parts. They will have everything you want but it can be expensive. Junk yards are good places to look if not picked empty by parts hunters that sell them at swap meets and things like that.
John

turbinesurgeon · 04-08-2002, 03:32 AM

I got my bolt in 9 inch rear end from a 59 Ford Fairlane. I ditched original axles and brake assemblies and replaced them with Granada axles and brake junk. I managed to find a 70 something model 4 wheel drive Ford and got a 3.L50 limited slip rear. Alot of the Econline vans in the mid 70s had 9 inch 3.L25 rears All said and done around 200 bucks. Some of these other fellows might be able to tell you all the different axles that are 9 inch and fit but I think 57-60 Ford passenger cars,Fairlane,Galaxie and if you are lucky you may find a 9inch Granada all which have the axle width nearly identical to 64-66 mustangs and will bolt right up. The only snag is to make sure the axles you choose to replace the originals with will match the center section you choose. 28 spline axles are common but there are 31 spline axles too. Sorry for being windy! Good luck!

04-07-2002, 11:50 AM	#1
werked 66 Registered Member Join Date: Dec 2001 Location: Brooklyn , New York Posts: 45	rear end i amm looking to get a full bolt in rear end posi . does anyone know where i can find one of these for a good price . i need all the help i can get. thanks werked 66

04-08-2002, 01:51 AM	#2
jwboner Registered Member Join Date: Jun 2001 Location: Under the hood Posts: 164	Currie sells complete and individual rear end parts. They will have everything you want but it can be expensive. Junk yards are good places to look if not picked empty by parts hunters that sell them at swap meets and things like that. John __________________ 65 fastback 347 DFI injected w/vic jr, TFS heads, MSD, cable clutch TKO, 3.70 9", tc subframe conns, custom traction bars, griffen alum radiator, armored fuel cell, and torq thrust D's Retrofitted Prelude seats. Vintage Air underdash kit. Fiberglass here and there too More on the way all the time.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
new rear end	fordkid68	Classic Mustangs	18	11-24-2009 08:05 PM
What kind of rear end do I have?	Stang_ROTY	Windsor Power	3	01-29-2005 02:46 PM
want rear disk without changing overall length of rear....please help!!!	dragstang86	Windsor Power	1	07-31-2003 06:32 PM
installing cobra rear in my LX...picked up a totaled 93 limited edition	dragstang86	Windsor Power	1	05-26-2003 11:23 AM
Rear Brake Line Removal	Kisner	Classic Mustangs	2	03-13-2002 12:31 PM

04-08-2002, 03:32 AM	#3
turbinesurgeon Registered Member Join Date: Mar 2002 Location: virginia Posts: 9	I got my bolt in 9 inch rear end from a 59 Ford Fairlane. I ditched original axles and brake assemblies and replaced them with Granada axles and brake junk. I managed to find a 70 something model 4 wheel drive Ford and got a 3.L50 limited slip rear. Alot of the Econline vans in the mid 70s had 9 inch 3.L25 rears All said and done around 200 bucks. Some of these other fellows might be able to tell you all the different axles that are 9 inch and fit but I think 57-60 Ford passenger cars,Fairlane,Galaxie and if you are lucky you may find a 9inch Granada all which have the axle width nearly identical to 64-66 mustangs and will bolt right up. The only snag is to make sure the axles you choose to replace the originals with will match the center section you choose. 28 spline axles are common but there are 31 spline axles too. Sorry for being windy! Good luck!