

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
![]() |
#1 |
Registered Member
Join Date: Feb 2002
Location: Omaha
Posts: 124
|
![]() Well we started to have some 90 degree weather out here and the stang has started to run hot????? never over heats but it is running to hot!! 220 240
I have pressure checked the system, no problems. I bought a new rad cap!!! My problem is only when I am going slow or sitting in traffic as long as I am moving 45 or faster it stays cool. I let the car run at Idle and the fan clutch seems to be working fine. I would not think it would be the Thermostat because it runs fine at all other times ? By the way I do have a Griffin Alu rad , I would think that would help. And a stock ford clutch and fan/shroud. Am I looking in the wrong spot or what ???? ![]() ![]()
__________________
Mods:Svo Alu Y Heads,1.72roller rockers,Cam,Cobra Upper&lower,bbkEqu hedders,Offroad H,FlowmasterMuffs,BBk70mm Tb,and73mmMAF,UnderDrive Pulleys,24lb Svo Inj,Kirban AFPR,190lph Walbro,Griffin Alu Rad,Crane Coil,Batt Relocated to trunk,K/Ncone,smog pump removed,Built Aod,DSSL,3.73gears,Alu flywheel,2800stall,NOS 5115 100shot, Iknow I forgot something Best on motor13.66@102.55 2.14 60' Best on spray13.20@108.98(2.69 60') I Bet mid to low 12 if I can Hook! All runs on street tires |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Feb 2002
Location: Pennsylvania
Posts: 120
|
![]() Replace the thermostat. They only cost a couple of bucks. Drain, flush, and refill the system. I don't know what's causing it, that's just my .02.
__________________
I'm sofa king we tall did. |
![]() |
![]() |
![]() |
#3 | |
Registered Member
Join Date: Mar 2002
Location: Long Island, NY
Posts: 55
|
![]() Quote:
__________________
TFS heads/FTI custom cam/TFS street heat, Longtubes, 373's, MM lca's, Tokico springs/shocks |
|
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Aug 2001
Location: Ft. Worth, TX
Posts: 456
|
![]() Another vote for the fan clutch. While your at it, DO replace the thermostat as stated before. I use water wetter with about 20% coolant, the rest is water. I have the same radiator and mine is cool as a you can get. My electric fan rarely comes on.
__________________
You're gonna need your seatbelt |
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Nov 2001
Location: SanAntonio, Tx
Posts: 734
|
![]() I've had bad luck with clutch fans, thats just me, but imo, every stang should have come stock with an electric fan, i have a 160 stat, and my fan rarely comes on as well.
__________________
Police package 5spd 90 Lx, Stock original motor, 3.27grs, BM fan, fms 10.5 clutch, D&D quadrant, and adjuster, ADS chip, 180 stat, mac cai, mac h-pipe, mac subframe connectors, ASP crank pulley, ripper shifter, 26x10.5 M/T sport pros welds. 246 hp according to analyzer ![]() Race weight: 3,120 E.t-13.57 with 26x10.50's e.t. streets. 1.88 60' mph- 99.92 mph |
![]() |
![]() |
![]() |
#6 |
Registered Member
Join Date: Feb 2002
Location: Omaha
Posts: 124
|
![]() ????? The fan clutch seems to be working could it still be worn? When I park it and rev the car or just sit there the fan does run?
![]()
__________________
Mods:Svo Alu Y Heads,1.72roller rockers,Cam,Cobra Upper&lower,bbkEqu hedders,Offroad H,FlowmasterMuffs,BBk70mm Tb,and73mmMAF,UnderDrive Pulleys,24lb Svo Inj,Kirban AFPR,190lph Walbro,Griffin Alu Rad,Crane Coil,Batt Relocated to trunk,K/Ncone,smog pump removed,Built Aod,DSSL,3.73gears,Alu flywheel,2800stall,NOS 5115 100shot, Iknow I forgot something Best on motor13.66@102.55 2.14 60' Best on spray13.20@108.98(2.69 60') I Bet mid to low 12 if I can Hook! All runs on street tires |
![]() |
![]() |
![]() |
#7 |
Registered Member
Join Date: Nov 2001
Location: SanAntonio, Tx
Posts: 734
|
![]() It sounds as if your fan is working fine, but i thought mine was too, until it flew off, right through my radiator
![]()
__________________
Police package 5spd 90 Lx, Stock original motor, 3.27grs, BM fan, fms 10.5 clutch, D&D quadrant, and adjuster, ADS chip, 180 stat, mac cai, mac h-pipe, mac subframe connectors, ASP crank pulley, ripper shifter, 26x10.5 M/T sport pros welds. 246 hp according to analyzer ![]() Race weight: 3,120 E.t-13.57 with 26x10.50's e.t. streets. 1.88 60' mph- 99.92 mph |
![]() |
![]() |
![]() |
#8 |
Registered Member
Join Date: Feb 2002
Location: Omaha
Posts: 124
|
![]() How much do the clutches cost and how hard are they to install?
I dont want to go electric because of cost? Should I go with a 160 Stat? Or should I go with a flex fan with no clutch? ![]()
__________________
Mods:Svo Alu Y Heads,1.72roller rockers,Cam,Cobra Upper&lower,bbkEqu hedders,Offroad H,FlowmasterMuffs,BBk70mm Tb,and73mmMAF,UnderDrive Pulleys,24lb Svo Inj,Kirban AFPR,190lph Walbro,Griffin Alu Rad,Crane Coil,Batt Relocated to trunk,K/Ncone,smog pump removed,Built Aod,DSSL,3.73gears,Alu flywheel,2800stall,NOS 5115 100shot, Iknow I forgot something Best on motor13.66@102.55 2.14 60' Best on spray13.20@108.98(2.69 60') I Bet mid to low 12 if I can Hook! All runs on street tires |
![]() |
![]() |
![]() |
#9 |
Registered Member
Join Date: Mar 2002
Location: Long Island, NY
Posts: 55
|
![]() With the car off, rotate the fan and see if it has resistance when turning. It should have resistance. Dont put in a 160* stat, contrary to popular belief, cooler is NOT better. Optomal running temp is 195-200*. Keep the stock stat. Like I said you could flush your system out and run less antifreeze if u want. My buddy had the same problem as you, new fan clutch fixed it.
|
![]() |
![]() |
![]() |
#10 |
Registered Member
Join Date: Feb 2002
Location: Omaha
Posts: 124
|
![]() Well I got a fan clutch I will let ya know thanks!
![]()
__________________
Mods:Svo Alu Y Heads,1.72roller rockers,Cam,Cobra Upper&lower,bbkEqu hedders,Offroad H,FlowmasterMuffs,BBk70mm Tb,and73mmMAF,UnderDrive Pulleys,24lb Svo Inj,Kirban AFPR,190lph Walbro,Griffin Alu Rad,Crane Coil,Batt Relocated to trunk,K/Ncone,smog pump removed,Built Aod,DSSL,3.73gears,Alu flywheel,2800stall,NOS 5115 100shot, Iknow I forgot something Best on motor13.66@102.55 2.14 60' Best on spray13.20@108.98(2.69 60') I Bet mid to low 12 if I can Hook! All runs on street tires |
![]() |
![]() |
![]() |
#11 |
Registered Member
Join Date: Apr 2001
Location: Gallatin, Tn
Posts: 1,326
|
![]() Something not mentioned, if you have aftermarket pullies on the wterpump pulley that came with them makes the pump turn slower than normal, switching back to the stock pulley on the water pump could be an option. My $.02
__________________
![]() |
![]() |
![]() |
![]() |
#12 |
Conservative Individualist
Join Date: May 1997
Location: Wherever I need to be
Posts: 7,487
|
![]() geno:
Replace the fan/clutch and try to get the Ford 'Police-Duty' model. It's about 20% better at cooling and costs around $100. I've had one on my '90 LX for three years and it works beautifully after going through two factory fan cluch setups. Easy installation but a little tedious. You have to use hand wrenches to get the old fan off and the new one on (a socket doesn't really fit in the tight space between fan and radiator) so it takes a little while but it's no big deal. I wouldn't worry that much about the thermostat but if you have to drain the radiator anyway, might as well replace it. Get the stock 192-195 'stat, as recommended earlier. I use a 30/70 antifreeze/water mix for the summer and I add a can of Water Wetter. Great stuff! Hope the new clutch fan solves your problem. |
![]() |
![]() |
![]() |
#13 | |
Don Corlione
Join Date: Jun 2001
Location: Omaha NE USA
Posts: 491
|
![]() Quote:
I'll tell you this, my car never goes above the second tick mark from the bottom on my factory temp gauge! Even yesterday with our 90* weather.
__________________
Eric - 89 Mustang LX coupe 5 speed 302-Cobra Intake-GT40p heads-TFS stage 1 cam-FRPP 1.6 roller rockers-3:73 gears-KYB shocks and struts-Eibach Pro-kit-HPM Mega-bite upper and lower control arms-FRPP aluminum driveshaft-16x8 Chrome Cobra Rs R.H.C. #14 |
|
![]() |
![]() |
![]() |
#14 |
Registered Member
Join Date: Feb 2002
Location: Omaha
Posts: 124
|
![]() You guys are outstanding!!!!!! I put in the new fan clutch at work
and the problem's fixed!!!! Thank for all the help!!!!
__________________
Mods:Svo Alu Y Heads,1.72roller rockers,Cam,Cobra Upper&lower,bbkEqu hedders,Offroad H,FlowmasterMuffs,BBk70mm Tb,and73mmMAF,UnderDrive Pulleys,24lb Svo Inj,Kirban AFPR,190lph Walbro,Griffin Alu Rad,Crane Coil,Batt Relocated to trunk,K/Ncone,smog pump removed,Built Aod,DSSL,3.73gears,Alu flywheel,2800stall,NOS 5115 100shot, Iknow I forgot something Best on motor13.66@102.55 2.14 60' Best on spray13.20@108.98(2.69 60') I Bet mid to low 12 if I can Hook! All runs on street tires |
![]() |
![]() |
![]() |
#15 | |
Don Corlione
Join Date: Jun 2001
Location: Omaha NE USA
Posts: 491
|
![]() Quote:
__________________
Eric - 89 Mustang LX coupe 5 speed 302-Cobra Intake-GT40p heads-TFS stage 1 cam-FRPP 1.6 roller rockers-3:73 gears-KYB shocks and struts-Eibach Pro-kit-HPM Mega-bite upper and lower control arms-FRPP aluminum driveshaft-16x8 Chrome Cobra Rs R.H.C. #14 |
|
![]() |
![]() |
![]() |
#16 |
Registered Member
Join Date: Mar 2002
Location: Long Island, NY
Posts: 55
|
![]() The 160* stat is keeping the car too cold which in turn, lowers engine efficiancy, increases emissions, and increases potential sludge build up. I run a Ford 190* stat, prp boys 3 core rad, hi flow pump and I run 195-200* on my autometer gauge. This is with al heads/cam/intake and underdrive pulleys. Get a stock stat and if you want better cooling, get a better rad and flush the system and run more water than antifreeze. maybe 30/70 or 40/60 mix.
__________________
TFS heads/FTI custom cam/TFS street heat, Longtubes, 373's, MM lca's, Tokico springs/shocks |
![]() |
![]() |
![]() |
#17 |
Registered Member
Join Date: May 2000
Location: Kamloops, BC
Posts: 2,875
|
![]() Not sure on the fox cars, but the computers in the SN95 5.0's are expecting so see a 195* T-stat. If you put in a cooler one the computer will run in "start up mod" and you will get poorer gas mileage and performance.
Use a 160* T-Stat only if you have an aftermarket chip that requires it. |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Car running lean, any suggestions? | MATTKNIGHT | Windsor Power | 10 | 03-08-2009 03:52 PM |
My friend is Running WAY lean | TMASTER | Windsor Power | 5 | 07-13-2003 09:41 PM |
What headunit are you running? | tireburner163 | Audio, Security, & Electronics | 0 | 04-22-2003 01:33 AM |
running rich? | reignman | Windsor Power | 2 | 11-13-2002 10:19 PM |
Car's running hot... | Sonics2042 | Windsor Power | 8 | 07-16-2002 04:50 PM |