Just got my Holley Intake... QUESTIONS?

Skyman · 04-17-2002, 07:33 PM

I just got the holley intake I ordered.

It just says holley systemax on it.

I thought I ordered the systemax II. And the TB opening looks to be only 65mm just from eye balling it...

Did I mess up ordering it or something.

Rob help me out! I knwo u got one.

SKyler

BowTie Eater 5 Liter · 04-17-2002, 07:49 PM

from what i have herd, the systemax (not systemax 2) is just a lower, with a plate that says systemax, so most likely you got the right one.

Smokedawg · 04-17-2002, 07:57 PM

I am getting ready to order my Holley systemax intake....Where's the cheapest place you found to order it from Skyman? Do I need to make sure I specify Holley Systemax II intake.
Thanks
Derek...
See my other post for the new setup being built...

red82gt · 04-17-2002, 09:12 PM

I think Bow-tie's right there isn't a complete systemax I intake so I think you've got the right one.

faststang90 · 04-17-2002, 09:50 PM

the holley I is just a lower that looks stock ford type intake and holley II has the trucks type lower i have a70 tb on mine

SkadonyaCA · 04-18-2002, 12:44 AM

when did you get it?? I just saw you!

Skyman · 04-18-2002, 01:46 AM

Ok good, I guess I do have the right one then!

Thanks guys.

Skyler

04-17-2002, 07:33 PM	#1
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Just got my Holley Intake... QUESTIONS? I just got the holley intake I ordered. It just says holley systemax on it. I thought I ordered the systemax II. And the TB opening looks to be only 65mm just from eye balling it... Did I mess up ordering it or something. Rob help me out! I knwo u got one. SKyler __________________ 2001 BMW M3 6spd 12.79@108 RIP ---- 1993 Notch w/ 98 4V 4.6 Fasttt... -1989 Saleen Mustang #406- 12.32@109 -1999 Black Cobra Coupe- JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.

04-17-2002, 07:49 PM	#2
BowTie Eater 5 Liter Registered Member Join Date: Nov 2000 Location: Maple Ridge B.C. Canada, The Best Place In The World Posts: 871	from what i have herd, the systemax (not systemax 2) is just a lower, with a plate that says systemax, so most likely you got the right one. __________________ 1984 Bronco II, 36" Michelin Military Tires, 95 EFI 5.0, NP435 Tranny, NP208 Doubler, NP205 Transfer Case, Fill Size Solid Dana 44 Front End, WH Progressive Rate Rock Crawling Coils, Bronco 8.8 Rear, Skyjacker Softride Leafs, 5.13 Gears, Detroit Locker. Final Crawl Ratio Of 175:1 88 GT Best 60ft. 2.181 Best ET 14.350 Best MPH 98.01 ~WRECKED!!!!~

04-17-2002, 07:57 PM	#3
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	I am getting ready to order my Holley systemax intake....Where's the cheapest place you found to order it from Skyman? Do I need to make sure I specify Holley Systemax II intake. Thanks Derek... See my other post for the new setup being built... __________________ 1990 Mustang GT- 347 Stroker-Tremec 3550-Compucar Nitrous, AFR, Systemax Intake, AFM, 30lbers, 70MM TB, 76mm MAF, full suspension and lots more 1995 Chevy S-10 406 SBC, Dual tunnel ram, Dart heads, Nitrous, full tub, 4-link, adjustable drag shocks, coil-overs, 9in rearend, 4.56 gears...etc

04-17-2002, 09:12 PM	#4
red82gt Sober voice of Reason Join Date: Nov 1998 Location: Kelowna, B.C., Canada Posts: 1,514	I think Bow-tie's right there isn't a complete systemax I intake so I think you've got the right one. __________________ 393W: AFR 205's, hydraulic roller, TKO600.

04-17-2002, 09:50 PM	#5
faststang90 Registered Member Join Date: May 2001 Location: baytown,tx,us Posts: 128	holley I & holley II the holley I is just a lower that looks stock ford type intake and holley II has the trucks type lower i have a70 tb on mine

04-18-2002, 12:44 AM	#6
SkadonyaCA Registered Member Join Date: Mar 2002 Location: Ventura, CA USA Posts: 37	when did you get it?? I just saw you! __________________ 1992 Emerald Green and Titanium Mustang GT Hatchback AOD Mods: Ford racing springs; KYB gas adjust shocks/struts; Intake (undecided); Approx. 12 degree timing; GT-40 P heads (ported); GT-40 P headers (ported); Cobra Rockers; 65 mm Throttle body; EGR spacer; 80 mm Lightning MAF; 3.55 Ford Racing Gears; CustomChip; B&M high stall torque converter; tranny cooler; fuel pressure regulator and gauge; 175 Amp Alternator; 2000 watt Audiobahn/panasonic soundsystem; CD w/Changer, 2 - 10" Aluminum Subs; audiobahn 1 farad capacitor; Dual Cut-outs just past the primary Cats; MAC cold air induction; Reverse Indiglo guages; 9mm Wires; Window tint; underdrive pulleys _ ___________________ _ 2001 Silver GT Convert. Automatic Black top

04-18-2002, 01:46 AM	#7
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Ok good, I guess I do have the right one then! Thanks guys. Skyler __________________ 2001 BMW M3 6spd 12.79@108 RIP ---- 1993 Notch w/ 98 4V 4.6 Fasttt... -1989 Saleen Mustang #406- 12.32@109 -1999 Black Cobra Coupe- JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cobra Intake?	95mustanggt	Windsor Power	5	10-01-2002 09:55 AM
Questions about hoses connected to stock intake	zepherman	Windsor Power	14	09-13-2002 05:05 AM
Impressions of the Holley Intake.	Skyman	Windsor Power	19	07-02-2002 10:05 AM
Holley Systemax intake impressions	exgmguy	Windsor Power	4	10-09-2001 11:41 AM
Holley Systemax intake	exgmguy	Windsor Power	6	10-07-2001 12:43 PM