have a quick question....please help

dragstang86 · 11-19-2002, 08:40 PM

I know this guy selling a 76mm maf with the 30lb injector tube. If i buy this can i use the guts out of my stock maf to use with my 19lb injectors?

thanks for the help,

John · 11-19-2002, 08:42 PM

No, you'll have to buy a tube (if its interchangable) for 19 #'ers

dragstang86 · 11-19-2002, 09:02 PM

thanks for the quick reply.. I was looking at your sig and you have a very similar set up to what i will have by the end of the year. Im porting my cobra intake, putting some nice ported aluminum heads on it and a 76mm maf with 30lb injectors. I just wanted to ask what u were running at the track. right now ive been a 13.03 @104 with a 1.77 60ft still spinning a little. I hoping to get it in the 11's with the new set up.

thanks for your help

11-19-2002, 08:40 PM	#1
dragstang86 Registered Member Join Date: Sep 2002 Location: baltimore, md Posts: 220	have a quick question....please help I know this guy selling a 76mm maf with the 30lb injector tube. If i buy this can i use the guts out of my stock maf to use with my 19lb injectors? thanks for the help, __________________ 90 LX Hatchback 306, AFR 165's 58cc, E303, 1.6 roller rockers, 70mm throttle body, cobra intake, bbk fenderwell, bbk longtubes, x-pipe, flowmasters, pullies, msd 6a, crane ps-92, stock MAF sensor, electric fan, No AC, No air pump, flaming river quick ratio rack C-4, 3500 stall, 373's, aluminum driveshaft SSM Lift bars, , sub frame connectors, strut tower brace 12.57 @105.12mph w/ 1.686 60ft before bbk longtubes (with equal shorties) ----------------------------------------- 86 tube chassis coupe - the trailor queen

11-19-2002, 08:42 PM	#2
John Registered Member Join Date: Dec 1998 Location: Ft.Myers, FL. Posts: 150	No, you'll have to buy a tube (if its interchangable) for 19 #'ers __________________ 89 Notch: 10 pt. cage, d&d rear coil overs, moser 33 plines and spool, gutted 91 Hatch: cobra int. fms. c-springs, novi-1000 w/f-150 crank pulley (9lbs.) 06 F-350 6.0 crew cab lariat srw 4x4: turbo back exhaust, sct xcal.

11-19-2002, 09:02 PM	#3
dragstang86 Registered Member Join Date: Sep 2002 Location: baltimore, md Posts: 220	thanks for the quick reply.. I was looking at your sig and you have a very similar set up to what i will have by the end of the year. Im porting my cobra intake, putting some nice ported aluminum heads on it and a 76mm maf with 30lb injectors. I just wanted to ask what u were running at the track. right now ive been a 13.03 @104 with a 1.77 60ft still spinning a little. I hoping to get it in the 11's with the new set up. thanks for your help __________________ 90 LX Hatchback 306, AFR 165's 58cc, E303, 1.6 roller rockers, 70mm throttle body, cobra intake, bbk fenderwell, bbk longtubes, x-pipe, flowmasters, pullies, msd 6a, crane ps-92, stock MAF sensor, electric fan, No AC, No air pump, flaming river quick ratio rack C-4, 3500 stall, 373's, aluminum driveshaft SSM Lift bars, , sub frame connectors, strut tower brace 12.57 @105.12mph w/ 1.686 60ft before bbk longtubes (with equal shorties) ----------------------------------------- 86 tube chassis coupe - the trailor queen

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
quick question	axestang5o	Windsor Power	1	10-20-2003 08:01 PM
SSM Liftbars Vs. Lakewood Liftbars, And A Quick Clutch Adjustment Question.	BowTie Eater 5 Liter	Windsor Power	2	04-30-2002 06:56 AM
Quick question!! Need help fast please!... Steering wheel question!!!...	WA2FAST	Windsor Power	3	02-14-2002 02:41 PM
Quick Shifter Knob Question	jrfaraci	Windsor Power	2	06-25-2001 11:52 PM