min tps??

[pedley]

how do i set my min TPS
I know you hook up your volt meter to ground and the power to the green wire but on what?? I was told there was a black, green and an orange but what and where is it??
and how do i set the TPS at .98 volts??

Also I have lack of poer untill my pedal is almost on the floor??

Please help me!!

[bigred90gt]

Originally posted by pedley
how do i set my min TPS
I know you hook up your volt meter to ground and the power to the green wire but on what?? I was told there was a black, green and an orange but what and where is it??
and how do i set the TPS at .98 volts??

Also I have lack of poer untill my pedal is almost on the floor??

Please help me!! As for the tps, there is a black plastic peice on top of the throttle body. This is your tps. There are three wires coming out of it. You need to stab the green wire with the positive lead on you volt meter and the black wire with the neg lead. Turn the key on but dont crank the car. Before you do any of this, start the car and let it run until it gets to normal operating temp. There should be 2 screws on top of the tps. Loosen them a little so that you can rotate the plastic piece. Turn it until it reaches the desired voltage. Tighten the screws back down, being careful not to move the tps in the process. If the voltage cannot be acheived, you can bore out the screw holes a bit so that the desired voltage can be reached, though I dont think you will need to. Once the screws are tightened, viola, your tps is set.

I'm stumped on the power thing. I suggest doing the tps and checking your timing.

Caymon

[pedley]

my timming is set at 14 degrees

but thanks for the help!!

[ChunkFunky]

as for the TPS adjustment, I found it was easiest (for me atleast) to pull out the rubber insulator in the harness that the TPS plugs into... and then stick some paperclips into the terminals and then get the reading that way... you can stab into the wires anywhere you want.. but then you've got holes in your wires and I could never get a good poke doing it that way... just alittle tip if you have trouble
-as

[95mustanggt]

Originally posted by pedley
Also I have lack of poer untill my pedal is almost on the floor??

Please help me!!

What type/year of car? What has been done to it? How do you know its a lack of power? What happens for you to say this?

[pedley]

its an 88 gt
with f cam stock heads but shaved and ported
stock intake but ported
65mm thb
under drives
headers


i don't know if its a loss of power?

it is more like a hesatation?

ok if i do a line lock and go and shift in second it almost seems to bog out on me untill the pedal is half way down

[LX XLR8R]

i htink your cam is a little bg for your combo..try a b303 if you are stuck on the alphabet cams

[95mustanggt]

Originally posted by LX XLR8R
i htink your cam is a little bg for your combo..try a b303 if you are stuck on the alphabet cams

I'd have to agree.