View Full Version : best HP guess???
MiracleMax
08-06-2004, 12:01 AM
Okay best guess on HP estimate?
347 cid
AFR 185's (port matched)
Victor 5.0
75mm T-body
1-3/4 long tubes
11:1 comp
Comp Cams Nitrous HP, 232/244 @ .050 - .565/.580 - 114 deg for the cam specs, cam is retarded 2 deg.
Gonna round out the motor with 36 lbs/hr injectors and a 77mm Pro-M unit.
88fivepointoh
08-08-2004, 05:37 PM
my guess, 375hp...
jonnyk
08-08-2004, 07:03 PM
375 to the wheels? That'd be close to my guess too.
88fivepointoh
08-08-2004, 08:30 PM
yea, 350-375 conservitively speaking at the rear wheels.. what cam is in there?
MiracleMax
08-09-2004, 09:13 PM
Comp Cams Nitrous HP, 232/244 @ .050 - .565/.580 - 114 deg LSA, cam is retarded 2 deg.
Part# 35-560-8, NX282HR
Told the CC rep that I was looking for 400+ HP and a red line past 6000
advertised operating range is 2600 to 6600
also told him no S/C or NO, but interestingly that is the cam he spec'd fro my engine.
88fivepointoh
08-10-2004, 03:42 PM
350 at the rear... pretty close to that.
fiveOguy20
08-10-2004, 09:59 PM
hmm u guys seem to be rating REALLY conservative haha. i think properly tuned his combo is capable of 400+ at the wheels. my 2 cents
88fivepointoh
08-10-2004, 10:15 PM
better to expect less and get suprised with more, then expect more and get less, I have seen a similar setup dyno at around 350-375 rwhp. those are my thoughts.
MiracleMax
08-10-2004, 10:45 PM
was that with a stock computer 88 or something better able to support the engine?
Dark_5.0
08-11-2004, 01:18 PM
I just helped a buddy put together a 393 stroker 10 to 1 with ported victor junior heads and a trick flow R intake with a 600 lift cam single pattern with 224 duration, also has 36 # injectors and the car runs and idles like a dream with the A9L ecu.
88fivepointoh
08-11-2004, 02:44 PM
By buddy ran a A9L, not speed density...