were can i get parts

scott6685 · 11-30-2004, 11:06 AM

i need parts for a 1974 mustang hacth back. i need floors, wheel wells in the front, winsheld, all new crom for out sit and so in side panels.

i need help because i can not find any and can any one tell me what a 74 just rebuilt is werth

KiltedBanshees93GT · 12-01-2004, 11:21 AM

As far as parts, if you're looking for used stuff, and there are no junk yards in your area with what you need, your best bet would either be the various boards classifieds sections, ebay, and car shows/swaps in your area. Also "networking" with others in both the real world and online helps

For OEM and reproduction parts, there are dozens of companys out there, just try an online search. Some that spring to mind are california mustangs, dallas mustangs (I think) CJ pony parts etc. Just check in the back of one of the ford mags for more, including "specialty" companys like TCP.

As ar as what the car is worth, you'll need to explain exactly what the car is. If your fuzzy on exactly what you have, (i.e. options etc.) I would check a decoder. That can at least tell you what the car came from the factory with.
Heres one,
click me
You will need the VIN and the data tag on the inside of the door (and maybe more, depending) But its someplace to start.
Hope it helps,
J

scott6685 · 12-01-2004, 01:25 PM

thnak u for the help but the webs sites that you gave me did not have what i needed.

KiltedBanshees93GT · 12-03-2004, 09:18 AM

Sorry man, I didn't catch that it was a II

(I thought it said 73)
Mustang 2 parts are somewhat more difficult to come by, but I would say your best bet would be to check out http://www.mustangii.com/ From what I understand they are the biggest II site out there.
From the home page, just click the parts link at the top, they seem to have a pretty decent "parts and service" setup.
Also they would have a more accurate idea what a particular model would be worth once you know the particulars of the car.
Given the amount of structural work/major refurbishment it sounds like it needs, you might be better off shopping for one in better condition and use the one you have as a donor. They are still out there, you just have to look for them.
Good luck,

J

scott6685 · 12-03-2004, 12:27 PM

thanks for the help. i am still looking for the inner front fenders. can so one pealse help me. this car was only suppost to take two or three month to do and it is going to take longer so i can not redue a 66 mustang

KiltedBanshees93GT · 12-04-2004, 08:08 AM

Quote:

Originally Posted by scott6685

thanks for the help. i am still looking for the inner front fenders. can so one pealse help me. this car was only suppost to take two or three month to do and it is going to take longer so i can not redue a 66 mustang

Actually, I ment look around for another Mustang II to use as the "driven" car, and use the one you have as spare parts for it.

J

scott6685 · 12-06-2004, 03:25 PM

that for the help i have found a place that has all the part for a mustang 2 and thank u for the help people because this was my first problem of many i think on rebuilding this car. if any one need the number to call to get parts for mustang 2 feel free to email me

11-30-2004, 11:06 AM	#1
scott6685 Registered Member Join Date: Nov 2004 Posts: 8	were can i get parts i need parts for a 1974 mustang hacth back. i need floors, wheel wells in the front, winsheld, all new crom for out sit and so in side panels. i need help because i can not find any and can any one tell me what a 74 just rebuilt is werth

12-01-2004, 11:21 AM	#2
KiltedBanshees93GT Registered Member Join Date: Jun 2000 Location: Pigeon Forge Tn Posts: 611	Re: were can i get parts As far as parts, if you're looking for used stuff, and there are no junk yards in your area with what you need, your best bet would either be the various boards classifieds sections, ebay, and car shows/swaps in your area. Also "networking" with others in both the real world and online helps For OEM and reproduction parts, there are dozens of companys out there, just try an online search. Some that spring to mind are california mustangs, dallas mustangs (I think) CJ pony parts etc. Just check in the back of one of the ford mags for more, including "specialty" companys like TCP. As ar as what the car is worth, you'll need to explain exactly what the car is. If your fuzzy on exactly what you have, (i.e. options etc.) I would check a decoder. That can at least tell you what the car came from the factory with. Heres one, click me You will need the VIN and the data tag on the inside of the door (and maybe more, depending) But its someplace to start. Hope it helps, J __________________ ____________ '66 Mustang Coupe- AKA "Lenore" on disability for a (long) bit '93 GT Mostly stock AKA "Fawkes" Rice Haters Club Member #239 "I find your lack of faith...disturbing." "Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats." H. L. Mencken

12-01-2004, 01:25 PM	#3
scott6685 Registered Member Join Date: Nov 2004 Posts: 8	Re: were can i get parts thnak u for the help but the webs sites that you gave me did not have what i needed.

12-03-2004, 09:18 AM	#4
KiltedBanshees93GT Registered Member Join Date: Jun 2000 Location: Pigeon Forge Tn Posts: 611	Re: were can i get parts Sorry man, I didn't catch that it was a II (I thought it said 73) Mustang 2 parts are somewhat more difficult to come by, but I would say your best bet would be to check out http://www.mustangii.com/ From what I understand they are the biggest II site out there. From the home page, just click the parts link at the top, they seem to have a pretty decent "parts and service" setup. Also they would have a more accurate idea what a particular model would be worth once you know the particulars of the car. Given the amount of structural work/major refurbishment it sounds like it needs, you might be better off shopping for one in better condition and use the one you have as a donor. They are still out there, you just have to look for them. Good luck, J __________________ ____________ '66 Mustang Coupe- AKA "Lenore" on disability for a (long) bit '93 GT Mostly stock AKA "Fawkes" Rice Haters Club Member #239 "I find your lack of faith...disturbing." "Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats." H. L. Mencken

12-03-2004, 12:27 PM	#5
scott6685 Registered Member Join Date: Nov 2004 Posts: 8	Re: were can i get parts thanks for the help. i am still looking for the inner front fenders. can so one pealse help me. this car was only suppost to take two or three month to do and it is going to take longer so i can not redue a 66 mustang

12-06-2004, 03:25 PM	#7
scott6685 Registered Member Join Date: Nov 2004 Posts: 8	Re: were can i get parts that for the help i have found a place that has all the part for a mustang 2 and thank u for the help people because this was my first problem of many i think on rebuilding this car. if any one need the number to call to get parts for mustang 2 feel free to email me

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which is your favorite general auto parts store?	Fox Body	Blue Oval Lounge	28	12-07-2017 11:18 AM
Cant get OEM parts for my SN95	Lethal5Oh	Windsor Power	0	10-20-2004 01:31 PM
Trading Notch for parts	Coupe Devil	Blue Oval Lounge	3	04-20-2002 12:58 PM
My Good Experience With Ford Parts On Line - Good Discounts	Maroon 5.0 LX	Blue Oval Lounge	1	10-03-2001 09:46 AM
What would these parts be worth?	2FastLX	Blue Oval Lounge	3	03-13-2001 09:11 AM