Pulled Codes, Please Help

[BowTie Eater 5 Liter]

ok, ive got a sn95 5.0l mustang motor in my bronco 2, and i pulled codes.

what i came up with was these codes
KOEO
327-EGR valve position circuit below minimum voltage/(EVP/EPT) valve position circuit below minimum voltage
539-A/C on/defrost on during KOEO test(i dont have an ac pump on the motor anymore, what do i do?)
552-Air management circuit 1 failure/Thermactor air bypass solenoid circuit failute
553- Air management circuit 2 failure/thermactor air diverter solenoid circuit failure
563-High speed electro drive fan circuit fault(im running a mechanical fan)
558-EGR valve regulator solenoid circut failure
565- canister purge solenoid circuit failurte

from what i see they seem to all be solenoid problems, could i have the wrong relay box installed and that be some of the problems?

KOER
116-coolant temp higher or lower than expected
311- thermactor air systedm fault during engine run
327- same as KOER test

if anyone could help me out on what to do to fix them all, that would be much appreciated

:cheers: