are 11's possible???with this combo.

joey50gt · 10-13-2001, 06:15 PM

Ok i am helping my friend put heads and cam on his 95 5.0 Aode and he already has a 125 shot of spray. With edelbrock alum.performer 5.0 heads stage 1 port job,stock intake and b303 cam with the 125 shot and a built Aode with a 2500 stall put him in high 11's with slicks?thanks for any help in advance.

blue oval 50h · 10-13-2001, 10:49 PM

No, mid to low 12s

Skyman · 10-14-2001, 02:16 AM

Loose the stock intake and you will hit the high 11's to mid 11's with good tuning just fine.

Skyman.

Fastest car in Ojai population 8000

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
332RWHP, 350rwtq

redsn95vert · 10-14-2001, 04:06 PM

This is kind of off the topic, but what dind of work did he do to his trans. I've blown 3 in 2 years w/ my combo.

------------------
95 GT convertable, 3.73 gears,Catco Hi-flo h-pipe, Flowtech headders, Cobra intake w/ 65mm tb
GT40 heads, march underdrive pullies, Saleen wires, custom made cold air induction

joey50gt · 10-14-2001, 04:33 PM

shift kit solid input shaft better clutches and other little s#H#I#T.But he will prob.blow the tranny sooner or later then he is going to put in a 5spd and all the other little **** with that.

racin85 · 10-14-2001, 05:33 PM

What kind of times did the car run before the mod?On 125 shot u should pick up at least 1 sec.

------------------
85 capri,balanced .030 over 79 302,windage tray polished/weight matched rods w/arp bolts.63 289 heads port/polish with FMS windsor springs. Torker 289 intake,514 solidcam,1.6rr.mac long tubes,off-road h,and pro dumps.T-5`4.10's on auburn HD carrier.NOS CHEATER kit,pullies and plenty more.Best NA run
1.683 60ft 7.837 @ 87 12.353 @ 109.05
NOS,11.21@ 116 1.49 60ft

joey50gt · 10-15-2001, 07:44 AM

He ran a best of 8.20 in the 8th mile on the spray and slicks.

10-13-2001, 06:15 PM	#1
joey50gt Registered Member Join Date: Jan 2001 Location: hurst,texas,america Posts: 95	are 11's possible???with this combo. Ok i am helping my friend put heads and cam on his 95 5.0 Aode and he already has a 125 shot of spray. With edelbrock alum.performer 5.0 heads stage 1 port job,stock intake and b303 cam with the 125 shot and a built Aode with a 2500 stall put him in high 11's with slicks?thanks for any help in advance.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Thoughts on Combo?	Rosco	Windsor Power	9	06-03-2004 06:07 PM
Anyone here run a similar combo and if so, what times did it run?	slowfive0	Power Adders	3	02-02-2004 01:39 AM
Carb Combo	86GT	Windsor Power	8	08-24-2002 07:23 PM
Possible new Combo _ LONG with ????'s	Coupe Devil	Windsor Power	2	05-29-2002 03:52 PM
BAD @SS N/A 351w Combo? (Long)	BowTie Eater 5 Liter	Windsor Power	0	02-27-2001 10:47 PM

10-13-2001, 10:49 PM	#2
blue oval 50h Registered Member Join Date: Dec 1998 Location: NJ Posts: 219	No, mid to low 12s

10-14-2001, 02:16 AM	#3
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Loose the stock intake and you will hit the high 11's to mid 11's with good tuning just fine. Skyman. Fastest car in Ojai population 8000 ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor *332RWHP, 350rwtq*

10-14-2001, 04:06 PM	#4
redsn95vert Registered Member Join Date: Jul 2000 Location: Rochester Posts: 323	This is kind of off the topic, but what dind of work did he do to his trans. I've blown 3 in 2 years w/ my combo. ------------------ 95 GT convertable, 3.73 gears,Catco Hi-flo h-pipe, Flowtech headders, Cobra intake w/ 65mm tb GT40 heads, march underdrive pullies, Saleen wires, custom made cold air induction

10-14-2001, 04:33 PM	#5
joey50gt Registered Member Join Date: Jan 2001 Location: hurst,texas,america Posts: 95	shift kit solid input shaft better clutches and other little s#H#I#T.But he will prob.blow the tranny sooner or later then he is going to put in a 5spd and all the other little **** with that.

10-14-2001, 05:33 PM	#6
racin85 Registered Member Join Date: Aug 2000 Location: libertycenter,oh,us Posts: 73	What kind of times did the car run before the mod?On 125 shot u should pick up at least 1 sec. ------------------ 85 capri,balanced .030 over 79 302,windage tray polished/weight matched rods w/arp bolts.63 289 heads port/polish with FMS windsor springs. Torker 289 intake,514 solidcam,1.6rr.mac long tubes,off-road h,and pro dumps.T-5`4.10's on auburn HD carrier.NOS CHEATER kit,pullies and plenty more.Best NA run 1.683 60ft 7.837 @ 87 12.353 @ 109.05 NOS,11.21@ 116 1.49 60ft

10-15-2001, 07:44 AM	#7
joey50gt Registered Member Join Date: Jan 2001 Location: hurst,texas,america Posts: 95	He ran a best of 8.20 in the 8th mile on the spray and slicks.