Robert_5_liter
10-28-2001, 05:03 PM
I Checked the timing on my 95 cobra today and i removed the spout connector like i should and checked and it only showed 4 Degrees inital timing it has never been changed since new where should it be set to?????????????????????????? (WTF) I thought they were supposed to be set at 10 Degrees initial.
Rob
GA. BOY
10-28-2001, 06:32 PM
10-12 degrees initial is about right rob. that should give you 30-34 total.
------------------
81 fox body
302
7.56 1/8 @ 88mph
1.58 60 ft.
lx mike
10-28-2001, 09:07 PM
it is supposed to be but sometime it isn't as you have found out bumb it to about 12-14 and see how it runs then.
------------------
Mike's LX (http://www.mustangworks.com/cgi-bin/moi-display.cgi?1900)
stanger8172
10-28-2001, 10:25 PM
I have mine set at 13 and it can't idle any lower than 1000rpm's.
------------------
'91 LX convertible , T-5,Centerforce Dual Friction, FMS adjustable cable w/quadrant, ported/polished/milled E7 heads, 1.6rr, 1.94/1.60 stainless valves, BBK 1 5/8" equal length shorties, 2 1/2" off road H-pipe, Summit 2 1/2" catback, March Performance Pulleys and A/C Eliminator