CALLING ALL DRAG RACERS FROM SO-CAL!

[fastang]

Lets pick a date in the next month or two and all meet at Carlsbad. Its open every Saturday from 1pm-? We should arrive around 12 though. I want to go, Skyler said that he wants to go. If your up to it post your name and a date and we will all agree on something.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[withamc]

I'm interested. Where's it at?

------------------
86 GT, GT40P heads, Cobra cam, 1.7 RR's, Cobra intake, 65mm TB, 73mm Vortech, 24# injectors, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s.
**************
Crane 2031 on order

[fastang]

I was just there saturday but it was rained out, take the 5 south to PALOMAR AIRPORT ROAD and make a left. Continue about 2 miles untill you hit BUSINESS PARKWAY and make another left. Drive about 30 yards and make a left on POINSETTIA. Poinsetia is an extremely small street that dead ends where you line up to start the racing.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[inferno]

hmmm...I might have to make a trip out there.

[Patrick Boetticher]

give me a date and ill be there, allong with the other stang guys from Camarillo.

[fastang]

Inferno, I want you to come! Bring all your turbo imports and show us what you got! Pat Boetticher, pick a date next month or so. Lets pick a date next month so we have time to get ready and DO THIS! Where's Sklyer anyway? He said he was down to go but Im not hearing him. http://www.mustangworks.com/interactive/msgboard/frown.gif Sky, bring your cousins car too.

[withamc]

I've got two guys from work that want to go too. March 10/17/24?

------------------
86 GT, GT40P heads, Cobra cam, 1.7 RR's, Cobra intake, 65mm TB, 73mm Vortech, 24# injectors, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s.
**************
Crane 2031 on order

[Skyman]

You know I'm definatly in. My cousins 68 will come too.

Camarillo huh? Some of the street racers out there?

Patrick- What kinda car you driving? I used to race out there a little a while back.

Also I'll try to get that other guy in moorpark from here to come.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns.
13.2@106mph

Daily Driver
STOCK-1994 Integra LS
15.48@91mph

[fastang]

How about the 24th? That should give everyone enough time to tune and prepare. I want to get a set of DR's for this http://www.mustangworks.com/interactive/msgboard/biggrin.gif I know about 15 people with domestics that might be interested too. IS THE 24TH GOOD?

[ed1371]

I will be definatly be there...Trekking from Yuma AZ I have to plan my trips...coincidently I already wanted to go that weekend! gates open at 1 pm and races go to 6 pm you want to write MW (mustang works) in that lovly shade of white shoe polish on the rear glass so we know who from here is going to be there?

kick a$$! lately there hasnt been a lot of stangs there...

[ed1371]

aww hell I thought you were talking about this month...no matter I will still be there in march, with a few others from yuma!

anyone going to be there feb 24th too? I am going both times regardless so let me know!

[ed1371]

by the way, on either date, if you need to do some work on your car that morning let me know, I will sponsor you to get on Marine Corps Base Mirimar and you can use the Auto Hobby shop there...all you need to get on base is license, registration, and proof of insurance..the shop has GREAT mechanics there to offer help/advice and it costs almost nothing!

anything to help a fellow stanger!

------------------
My Mustang (http://www.mustangworks.com/cgi-bin/moi-display.cgi?808)


91 LX Conv. 52,000 orig mi. Hurst shifter, 3.55 grs, NOS 150 dry kit, MSD 6al, MSD timing control, malory coil, pullies, fms adj fuel reg, BBK 70mm tb, Pro-m 75mm maf, battery in trunk, JBA shorties, JBA subs, JBA strut tower brc, dynomax "super turbo" 2 1/2 exhaust, FMS billit distrib, Hotchkis lower cntrl arms, MAC Fenderwell cold air kit, off road h pipe.

[slprlx]

OH OH OH ME TOO! <raises hand frantically>

I am at USC right now, uncle own Lister Rents in Thousand Oaks... T.O. http://www.mustangworks.com/interactive/msgboard/smile.gif So ANYTIME... but email is better for me, I dont check here too much!

Jason

------------------
1992 LX Hatch
couple of mods...
http://www-scf.usc.edu/~jlister/mustang.htm

[fastang]

Ed, if I get my exhaust and cont arms put in before the 24th of this month I will be there too. In fact I will write mustangworks on my car with my screenname! hope to see you there. Care for any test and tune this month too sky?

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[ed1371]

Sounds good...I am definatly going both times. I dont think all the stuff I just ordered will be installed by feb but it will done by the march date!
Hope to see you there fastang. I will write the same in my window...
if anything freaky happens and prevents me from going I will post and let you know (it would have to be something real major to stop me though!)

[Patrick Boetticher]

I have a 95 performane Red Gt (right now it has primer spots on it pending a paint job that i got screwd out of) I dont acuaslly race at the street races but i go and Hang' with all my buddys. the Location has changed to chuys off the carmen exit in cam..

Give me 2 weeks notice and ill be there!!!
all my buddys drive stangs, a '93, 95cobra, 94gt, 95gt, 94gt.
------------------
PPG Torch Red 95GT, Ported Explorer Intake, E-303 cam, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 19# Racing Injectors, AFS 10.5" Cobra R's, Nitto 555's, Eclipse & JL Stereo System... I just sold My K&N, It looks funny with Stock Air Box & filter!!!

[This message has been edited by Patrick Boetticher (edited 02-14-2001).]

[withamc]

March 24 - I'll be there. "MW" in the window?

------------------
86 GT, GT40P heads, Cobra cam, 1.7 RR's, Cobra intake, 65mm TB, 73mm Vortech, 24# injectors, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s.
**************
Crane 2031 on order

[ed1371]

Patrick: we are going to Carlsbad raceway...not street racing. (you may already know that but your post sounded like you were under that impression...

withamc: I am going to have MW on the back window, and username on drivers quarterwindow (I dont want to confuse the tower, they aren't the sharpest tacks in the box!)

[Skyman]

24th happens to be my dads birthday. I'd really like to make it though. I'm definatly going to try.

Fastang. How far south are you from Ventura/SantaBarbara. Ive never been to carlsbad, but I know its a LONG *** drive for me. Maybe we could meet up and caravan on the way down.

Especially the Camarillo guys, I could meet up with them on the way too. That'd be fun.

And if you guys didnt already know, my car is the Red Saleen, so you should be able to tell.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns.
13.2@106mph

Daily Driver
STOCK-1994 Integra LS
15.48@91mph

[Skyman]

I had an idea guys. I know quite a few guys from corral go out to carlsbad too. I could get em to meet up there at the same time too, maybe we could do a Mustangworks vs. Corral type of thing?

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns.
13.2@106mph

Daily Driver
STOCK-1994 Integra LS
15.48@91mph

[fastang]

MW VS The Corral huh, sounds good, I dont care as long as Im racing. I want to see who inferno brings. If everything falls into place I should have nittos on the rear for march http://www.mustangworks.com/interactive/msgboard/biggrin.gif Expensive *** tires, 125.00 a piece. I would like to meet up and caravan too. That a real good idea. With all the people we bring with us it could get pretty huge! Should I invite the folks at LS1.com too? Pat, your car sounds pretty sweet. Im looking forward to seeing how you run, maybe we could line em up since we both have similar cars?

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[KenI]

Sounds good to me.

------------------
------------------
95 Blown Cobra
#83 of 4005
:)
------------------

[Skyman]

KenI, thats good your in. Whats done to your car besides the blower? Any idea now of what it runs?

This sounds like its gonna be fun!

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns.
13.2@106mph

Daily Driver
STOCK-1994 Integra LS
15.48@91mph

[fastang]

OK, so far we have:
1. fastang (me)
2. withamc
3. inferno (maybe)
4. Patrick Boettichler
5. Skyman
6. ed1371
7. slprlx
8. KenI
Come on folks sign up!

[slprlx]

skyman has my email... I can meet up with his group as they come thru LA... or hell I can meet in Thousand Oaks (even tho its the opposite way), but I dunno how much racing I will be doing... this new aod is slow as F^)(*&^*CK compared to my old lx <sob>... never got a chance to run you skyler... oh well.. now you'll win! http://www.mustangworks.com/interactive/msgboard/wink.gif

Jason

------------------
1992 LX Hatch <ripped uca out of rear... rip>
1988 AOD GT Midnight Blue
couple of mods...
http://www-scf.usc.edu/~jlister/mustang.htm

[KenI]

Last time I was at Carlsbad I spun my ballancer. The car ran like crap after that. I was only able to run 13.5 @ 108 on street tires. I would like to see it closer to 13 flat.
Its a stock long block with shorties, 65mm Tbody, 80mm MAF, X-pipe w/cats, Vortech Strim 8#,MSD 6AL,3.55s.

------------------
------------------
95 Blown Cobra
#83 of 4005
:)
------------------

[fastang]

Im totaly jealous Ken. http://www.mustangworks.com/interactive/msgboard/biggrin.gif

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[Skyman]

Did everyone recieve the email that I sent out?

I used the email you have registered on MW. If it is no good anymore let me know.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns.
13.2@106mph

Daily Driver
STOCK-1994 Integra LS
15.48@91mph

[KenI]

[QUOTE]Im totaly jealous Ken. [/QUOTE}
Stop it. You'll make me blush.

------------------
------------------
95 Blown Cobra
#83 of 4005
:)
------------------

[fastang]

Sky, send me a personal message here or at pugslyann@hotmail.com Im havin probs with my other one, thanks.

[ricekilla]

i dont know if any of you remember me but i sold my 90 GT a few weeks ago and i am looking for a sn-95. maybe i'll cruise next time. you still want a dsm sky? i pity the fool. http://www.mustangworks.com/interactive/msgboard/biggrin.gif

------------------
my speed addiction outlet: 90 GT 3.73,s full exhaust, ignition, pullies, and all the other bolt-ons.


my "pimp" ricer: nissan 240 sx SE NISMO POWER BABY!!!!

[Patrick Boetticher]

I know, we are going to calsbad, some on had mentioned they went to the Camarillo Street races, the location has changed...

------------------
PPG Torch Red 95GT, Ported Explorer Intake, E-303 cam, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 19# Racing Injectors, AFS 10.5" Cobra R's, Nitto 555's, Eclipse & JL Stereo System... I just sold My K&N, It looks funny with Stock Air Box & filter!!!

[fastang]

Hey Pat, whats your car running in the quarter? Does anyone else want to go on the 24th of this month too? Im probably going to go and I know a lot of others who are going too.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[Patrick Boetticher]

the last time i ran a 15.3 at LACR, so that is about a what a 14.8 corrected... that was just with pulleys so i have no idea what i run now, hopefully allot faster.
Ill try to get i off for this month!!!

[This message has been edited by Patrick Boetticher (edited 02-16-2001).]

[Skyman]

RiceKilla- !! I thought you had disappeared man. **** Yeah I still want a DSM, I found a 1990 Talon Turbo for $1500 or best offer in Pomona. (626) area code, that I wanna check out..

Find a stang and come down w/ us.

Patrick- Screw LACR! Thats the worst track I've ever been to in my life. My first run out there I ran 14.3@98mph in 65 degree weather. Second run 13.8@100 and then I said screw it! and I left.
I made low 13's at pomona given 40degrees hotter weather!! So go figure. That track is **** . I lost probably close to 7-8mph on my MPH there.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns.
13.2@106mph

Daily Driver
STOCK-1994 Integra LS
15.48@91mph

[ed1371]

I got 2 coming from Yuma... Maybe more...

whats the count now? this is going to kick a$$

[fastang]

OK so the REAL date is MARCH 24TH. My friend with the SS that I posted about is going next week on the 24th of this month and he is bringing a few stangs with him. Anyone else want to go? Maybe you Sky? Lemme know.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[Skyman]

Anyone feel like doing a 65mm to 70mm TB swap just for fun to see how it actually performs at the track?

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns.
13.2@106mph

Shooting for 12's and a 351 slowly in the works!

Stock-94 Integra 15.48@91mph

[fastang]

Maybe, Bring the TB and tools and I will Bring my car. It might help out my cam, but I have read that it doesnt make much of a difference and can actualy hurt your et if not set up right.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[46stang]

I definately want to go. I have to work march 24, but maybe I can swap weekends with one of the other guys. I'll know for sure a couple weeks before the 24th. It sounds like fun meeting up with all you Ventura locals and caravaning down.

------------------
96 stang,ported 99 heads, 99 intake, 99 cams, 373's, 70mm t/b, gutted maf, bassani x-pipe w/cats, ultraflow catback,iat mod, home depot ram air, k@n. fms spings, tri-ax shifter.

[CobraMan]

Ya, I'll be there too. I'm in the Woodland Hills/West Hills/Calabasas area... to give some kind of idea. I might get some more guys to go-- with stangs. Count me in


-Andrew

[Skyman]

What are you driving cobra man? Are you going both times or just the MARCH 24th?

Skyler

------------------
-1989 Saleen Mustang #406- (http://www.mustangworks.com/cgi-bin/moi-display.cgi?419)
TFS Heads, E-303 Cam, Edelbrock Intake, and a whole lot more.
13.2@106mph
-Shooting for 12's and a 351 slowly in the works!

Stock-94 Integra 15.48@91mph

[fastang]

Sky, Ive got some good news and some bad, The bad news is that I cant make it next weekend bc I gotta work http://www.mustangworks.com/interactive/msgboard/frown.gif But the good news is that I need new U joints so Im getting an aluminum ds with the good joints http://www.mustangworks.com/interactive/msgboard/smile.gif So next month I will defintely be there ready to run http://www.mustangworks.com/interactive/msgboard/smile.gif

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[Skyman]

Same for me actually, so that turns out fine. The final date is march 24th. I'd like to get everyones current email addresses if the one they have in their registry on here isnt current so we can figure out a way to all meet up on the way down there and caravan.

Hopefully I'll get my race seats and stuff in by then.

Skyler

------------------
-1989 Saleen Mustang #406- (http://www.mustangworks.com/cgi-bin/moi-display.cgi?419)
TFS Heads, E-303 Cam, Edelbrock Intake, and a whole lot more.
13.2@106mph
-Shooting for 12's and a 351 slowly in the works!

Stock-94 Integra 15.48@91mph

[fastang]

Sky, Email me at dymples797@aol.com. Thats my girls address. Im having probs with mine. Or just send me a personal message here. So far we have about 10 people from here plus all the people were bringing. Its gonna be so big were not even going to get a pass in!lol I hope I can get a set of nittos for this too. I should have an aluminum ds, controll arm set, longtubes, flows and nittos installed by this time next month, maybe I will pull a 12 too http://www.mustangworks.com/interactive/msgboard/biggrin.gif (I doubt it)

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[withamc]

SKYMAN - I assume you'll be coming down the 101, so we'll just figure out a way to hook up as you come thru Thousand Oaks. Trade cell phone #'s or something. I'm looking forward to this - never been to a strip before, just stoplights. How much does it cost to race?

------------------
86 GT, GT40P heads, Crane 2031 installed & waiting on longer pushrods, 1.7 RR's, Cobra intake, 65mm TB, 73mm Vortech, 24# injectors, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s.


[This message has been edited by withamc (edited 02-21-2001).]

[fastang]

I believe its only ten bucks http://www.mustangworks.com/interactive/msgboard/smile.gif

[ed1371]

$12 to get in, $10 to race

$22 total for 5 hours at the track

Anyone going to be there this weekend too?

[fastang]

What at rip off! Pomona was cheaper and better!

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[46stang]

yea but pomona was allways packed http://www.mustangworks.com/interactive/msgboard/frown.gif Shoot i would get to pomona at 6:45am and it would be sold out by 7:00am, when it actually opened, then i wouldnt get to my first race until nearly noon or later. that sucked. I've never been to carlsbad so hopefully it wont be that bad.

------------------
96 stang,ported 99 heads, 99 intake, 99 cams,Steeda power pullies, 373's, 70mm t/b, gutted maf, bassani x-pipe w/cats, ultraflow catback,iat mod, home depot ram air, k@n. fms spings, tri-ax shifter.

[slprlx]

I didnt get an email skyman... but anyways-->

I will be able to come March 24th with a couple buddies from Fresno, CA.. so that should be fun. I need to get in the caravan that is coming from the t.o./camarillo area as well... gimme an email at jlister@usc.edu

thanks
Jason

------------------
1992 LX Hatch <ripped uca out of rear... rip>
1988 AOD GT Midnight Blue
couple of mods...
http://www-scf.usc.edu/~jlister/mustang.htm

[Skyman]

I emailed everyone from this post.

Skyler

------------------
-1989 Saleen Mustang #406- (http://www.mustangworks.com/cgi-bin/moi-display.cgi?419)
TFS Heads, E-303 Cam, Edelbrock Intake, and a whole lot more.
13.2@106mph
-Shooting for 12's and a 351 slowly in the works!

Stock-94 Integra 15.48@91mph

[NO SLO PK]

Sounds like a blast. Unfortunately my 'stang needs a clutch and tranny http://www.mustangworks.com/interactive/msgboard/frown.gif.

Can I bring my Lightning instead???

------------------
'91 LX
Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.

[fastang]

NO SO POK: Yes! bring your Lightning. I want to run one. I drove one the other day and I loved it. I dont think it was as fast as my stang but I could be wrong since I have heard of a few hitting 13.6's stock. I want to run or just compare timeslips.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[NO SLO PK]

Uh well, my Lightning is a '94 so it isn't going to be turning 13s any time soon. Man how I wished I could get my LX fixed in time (sigh) !!

------------------
'91 LX
Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.

[Skyman]

Can't get the clutch/tranny in in time or what?
Theres 4 weeks left still.


Skyler

------------------
-1989 Saleen Mustang #406- (http://www.mustangworks.com/cgi-bin/moi-display.cgi?419)TFS Heads, E-303 Cam, Edelbrock Intake, and more.
-Videos (MPEG)-
0-110MPH In car view (963k) (http://members.aol.com/lskymanl/Saleen1.mpg)
All Throttle through 3 gears! (497k) (http://members.aol.com/lskymanl/saleen2.mpg)
Tire Smoking Burnout! (218k) (http://members.aol.com/lskymanl/burnout.mpg)

[fastang]

Sky, I just read you E mails, Can I meet you guys a little further down the road? I think Im a little further south than T.O. Will those slicks fit on my car? I have 5lug but my car is lowered a quarter inch in the rear and I will have a set of controll arms on. I think it will still clear though.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[NO SLO PK]

Originally posted by Skyman:
Can't get the clutch/tranny in in time or what?


Well, it's going to cost $2000+ for a new Tremec TKO, and property taxes are coming due http://www.mustangworks.com/interactive/msgboard/frown.gif. So it's going to take me more time to get the funds to make the lx run. I know I sound whiny and sad about this, but it is bumming me out. Anyone want to lend me the cash?



------------------
'91 LX
Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.

[Skyman]

I think the 5lug spacing we have is the same. The rims the tires are on now have horrible back spacing. They stick out like crazy. Thats ok though, cuz it pretty much means they are guaranteed to fit, cuz they stick out instead of in. If your only lowered .25" thats nothing..

Skyler

------------------
-1989 Saleen Mustang #406- (http://www.mustangworks.com/cgi-bin/moi-display.cgi?419)TFS Heads, E-303 Cam, Edelbrock Intake, and more.
-Videos (MPEG)-
0-110MPH In car view (963k) (http://members.aol.com/lskymanl/Saleen1.mpg)
All Throttle through 3 gears! (497k) (http://members.aol.com/lskymanl/saleen2.mpg)
Tire Smoking Burnout! (218k) (http://members.aol.com/lskymanl/burnout.mpg)

[Patrick Boetticher]

ill be at the Toys R us PArking lot in TO at 9:45 or so with some guys from Camarillo And WITHAMC,and other people from the chat room!!! so far my count from guys from CAmarillo is 4 including me..

------------------
PPG Torch Red 95GT, Ported Explorer Intake, E-303 cam, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 19# Racing Injectors, AFS 10.5" Cobra R's, Nitto 555's, Eclipse & JL Stereo System... I just sold My K&N, It looks funny with Stock Air Box & filter!!!

[fastang]

SWEET! http://www.mustangworks.com/interactive/msgboard/biggrin.gif I cant wait. With all the $hit Im doing to my car this month I just might crack a 12 with those things. They are good for at least 2 tenths right?

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[Skyman]

Fastang- With my ET streets you could probably pull a 1.7-1.8 60' with that I think your going to need about 102-103mph trap to break a 12... What do u think?

Skyler

------------------
-1989 Saleen Mustang #406- (http://www.mustangworks.com/cgi-bin/moi-display.cgi?419)TFS Heads, E-303 Cam, Edelbrock Intake, and more.
-Videos (MPEG)-
0-110MPH In car view (963k) (http://members.aol.com/lskymanl/Saleen1.mpg)
All Throttle through 3 gears! (497k) (http://members.aol.com/lskymanl/saleen2.mpg)
Tire Smoking Burnout! (218k) (http://members.aol.com/lskymanl/burnout.mpg)

[fastang]

Im pretty sure I could cut a hundred right now and with the mods Im installing next week I should be able to hit 102-103. We'll have to find out http://www.mustangworks.com/interactive/msgboard/biggrin.gif

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[EDGECRUSHER]

uh oh...
did someone say MW vs. Corral???? http://www.mustangworks.com/interactive/msgboard/biggrin.gif

Hey guys, it's da EDGECRUSHER...no flaming or anything, just here to see what's up.
I don't care what club we get out there, just as long as the ratio of Mustangs to anything goes up!
We had a Cruise and drag event last month...went real well, met up in O'side and cruised down the PCH to Carlsbad. It was pretty damn cool, I expect the next one to be bigger. You all are invited to join us earlier for the cruise before the racing starts-don't worry, though, we'll play nice until we get to the track!!!!

------------------
Michael J. Fedo IV
~1997 Mustang GT~
14.84@93
NO MODS!
www.edgecrusher.net

[fastang]

Hey sky or anyone else knowlegable. I have never ran on slicks before and Im realy not sure how the burnout thing goes. Should I start out in second since Im a rookie and feather the gas untill she starts to leave the water and my rpms go down? Or should I start out in 3rd and drop the clutch at the redline so they spin faster in the end? Someone actualy told me to start out in first/use the brakes to stop me from leaving the water and to shift through the gears. That just sounds a little tough.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[Super9089]

I'm jealous of all you left coasters getting together.

Faststang, the way I do it back east is roll it thru the water,light spin in first just to coat the tires,roll it out to dry ground,stop ,slip it in second & burn em at about 3500-4000 rpm till it starts to pull down. big burnouts in the box can throw water around the rear wheel wells that could come back to haunt you at the line.

Have fun.

[NO SLO PK]

Hey Fastang,

Do you and Skyler care if I invite a few of my Lightning buddies to join in? I also think my buddy with the blown SVT contour wants to go. I mean I don't want to be crashing your guys' party with a lot of people, so just let me know.




------------------
'91 LX
Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.

[fastang]

BRING EM ALL! Any quick ford is fine by me. I love lightnings. I just want to get 2 passes in. One on the slicks and one on the radials.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[fastang]

Super, thanks for the info, I'll try that. I was worried about screwing up my drivetrain too, but my motorsport clutch only has about 17,000 miles on it and I am installing an aluminum ds tonight with better U joints, I think it will hold up ok.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[andrewgarland]

Count me in! I'm not racin this time, maybe this summer, I haven't done any mods yet, but I sure as hell wanna go! I'd be coming from LA.

Fastang/Sky: Email me at andrewgarland@yahoo.com or send me a PM, with more information. Carlsbad at 1:00 pm on March 24th right? I live near NO SLO PK.

NO SLO: I can lend you some cash if you need it... Not quite 2K, but if your'e serious I might be able to help you out.

[Skyman]

Sounds good guys... How crowded is it there? Id like to get 5-6 passes at least. Pomona was hell. 6 hours for 2-3 passes usually. Id like to try a couple settings on my timing and a couple runs on and off the mickey thompsons.

Skyler

------------------
-1989 Saleen Mustang #406- (http://www.mustangworks.com/cgi-bin/moi-display.cgi?419)TFS Heads, E-303 Cam, Edelbrock Intake, and more.
-Videos (MPEG)-
0-110MPH In car view (963k) (http://members.aol.com/lskymanl/Saleen1.mpg)
All Throttle through 3 gears! (497k) (http://members.aol.com/lskymanl/saleen2.mpg)
Tire Smoking Burnout! (218k) (http://members.aol.com/lskymanl/burnout.mpg)

[fastang]

I dont think its usualy that busy, but you never know, especialy with all the heads were bringing

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

[NO SLO PK]

Well, I got 3 other Lightning owners that want to go, and I haven't even sent out an anouncement yet.

I might as well invite the SCOASCC (Cobra Club).

WE'LL MAKE THIS A FORD VS. THE WORLD EVENT!!!!!

L8r,

Russ


------------------
'91 LX
Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.

[Skyman]

Ahh, not too many. Sorry, I dont mean to sound greedy, but Im driving 3.5 hours and i want to get atleast 5 passes in. http://www.mustangworks.com/interactive/msgboard/smile.gif Just the lightening guys, we dont need the cobras too. http://www.mustangworks.com/interactive/msgboard/smile.gif

Skyler

------------------
-1989 Saleen Mustang #406- (http://www.mustangworks.com/cgi-bin/moi-display.cgi?419)TFS Heads, E-303 Cam, Edelbrock Intake, and more.
-Videos (MPEG)-
0-110MPH In car view (963k) (http://members.aol.com/lskymanl/Saleen1.mpg)
All Throttle through 3 gears! (497k) (http://members.aol.com/lskymanl/saleen2.mpg)
Tire Smoking Burnout! (218k) (http://members.aol.com/lskymanl/burnout.mpg)

[fastang]

Yeah sky's got a point there.

[NO SLO PK]

Hey Sky and Fastang, I wouldn't worry. I've been there a several times and you'll get 5-6 passes in easy. You can do even more if you don't let the engine cool between runs (which I don't recommend).

If you don't want me to invite a lot of people, then I won't.

[fastang]

Im not sweating it at all. I will be happy if I get two in and satisfied with one. The last time I went to Pomona I only got one run in the whole damn day. There must have been a thousand 15 second ricers there. On the other hand I got 12 passes in once at pomona when my car was stock. Everyone left for some reason and I was able to stage, run, stage, run, and so forth. My car was quite consistant though.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

[fastang]

Update anyone? People who are still going, how many people are joining you? Anyone slammin more parts on before the big day?

[slprlx]

I will be bringing 3-4 friends with me and meeting in TO... as far as last minute mods http://www.mustangworks.com/msgboard/wink.gif

The poor gt is getting an Art Carr extreme duty AOD w/tbrake, manual vb, and 3k stall, and the rear from my lx (3.73's 31 spline), with eibach launch kit, steeda lowers, D&D adj uppers, D&D camber/caster plates. We'll see how fast these stock motored AOD cars really are? (cuz right now I think I could beat it with my ten speed! http://www.mustangworks.com/msgboard/frown.gif )

cya there boys/girls
Jason

------------------
1992 LX Hatch <ripped uca out of rear... rip>
1988 AOD GT Midnight Blue
couple of mods...
http://www-scf.usc.edu/~jlister/mustang.htm

[fastang]

Im not sure what your gonna run but you should have one helluva 60 ft!

[withamc]

I just put on Groundpounder subs, and I hope to get the Groundpounder lower control arms on this weekend. I'm also taking it to get it dyno'd Friday.
Hey - I just put on an Aeromotive FPR and it's jammed tight against my EGR valve. Anybody ever run into this? Is there an EGR valve that DOESN'T do this? AAHH!

[ed1371]

well, just talked to Summit and my cage will be shipped out fri or sat...just have to get it in the car in time to race! everyone still good to go?

[fastang]

HE11 yeah Im still goin. Im gonna do my best to get a new intake before then too.

[withamc]

We don't need cages for this, do we?

[fastang]

I dont think you need a cage untill you run 11's but I could be wrong, either way Im not gonna have to worry about it for a while. lol

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

[ed1371]

no, you guys dont need cages unless you have a convertible that runs 13.99 or less. They usually are lieniant but I have been going there too often and was told last time that unless I get a cage, I cant go below 14's. (No fun if I cant go for my best time!)

[NO SLO PK]

Sky or Fastang, can you send me a private message with the details?

Thanks!

------------------
'91 LX
Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.

[fastang]

NO SLO PK, judging by your sig, your car looks awesome. Have you ever ran it before?

[withamc]

Well, since I've got a convertible, I guess I better not break into the 13's, or that'll be my only run for the day, huh? I'm taking it to Germanson Automotive in Oxnard for a dyno-tune on Friday, so I'll plug the results into the analyzer and see what I should run. Look at my sig and take a guess on RWHP.

------------------
86 GT, GT40P heads, Crane 2031, 1.7 RR's, Cobra intake, 65mm TB, 73mm Vortech, 24# injectors, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s, Groundpounder subs and lower control arms.

[Skyman]

No SLO- Did you get the details of where we are meeting up?

Damn I'm gettin excited guys! I cant wait.

withAmc- How did you get in there? I heard itw as a 6mo waiting list? Are they going to tune your car? I'd love to get a tuneing session in.

As for last minute. I'm pulling all the seats, Front sway, A/C and thats it.

Sky

------------------
-1989 Saleen Mustang #406- (http://www.mustangworks.com/cgi-bin/moi-display.cgi?419)TFS Heads, E-303 Cam, Edelbrock Intake, and more. Added Eibach drag launch springs and 70/30's w/ 50/50's.
0-110MPH In car view (963k) (http://members.aol.com/lskymanl/Saleen1.mpg)
All Throttle through 3 gears! (497k) (http://members.aol.com/lskymanl/saleen2.mpg)
<A HREF="http://members.aol.com/lskymanl/burnout.mpg" TARGET=_b

[withamc]

SKYMAN - Just call them up. That 6 month backlog was earlier in the year, they're OK now. I could have gone last week, but I wasn't ready yet. He's going to hook up a wideband O2 sensor, fuel pressure monitor, then run it, tweak it and run it some more. They can burn chips for you, but that gets expensive. It's $100 an hour for dyno time.

[This message has been edited by withamc (edited 03-09-2001).]

[ed1371]

I am bringing a couple from here and maybe one more from san diego. I really hope the third person goes...his stang is set up for autocross and it is absolutly BAD! He has over 5K just in the suspention alone! He is also one hell of a driver. Dammit pete, if you are reading this you better be there!

[fastang]

Droppin the A/C huh Sky, What do you have to do about the belts?

[withamc]

Better than I thought it would be! 277 RWHP @ 5000 RPM, 313 ft/lbs torque @ 3500 RPM. It started out at 242 HP, dropped the fuel pressure to 35 PSI, advanced the timing to 16, 34 more HP.
If I figure my 86 convertible with 200 lb me in it weighs 3600 lbs, that should put me at a 13.7 at 99 MPH. (assuming I know how to drive). Think they'll kick me off the track?
I'm putting the LCA's in this weekend, if I have time I'll rebuild the Trac-Lock and lose the sway bar before we go.

[This message has been edited by withamc (edited 03-09-2001).]

[ed1371]

withamc: they will let you make a couple runs before telling you to pit it...
(one for the warning, 1 more to get put in the bleachers)

[Skyman]

Wow thats good Withamc. How much did it cost you for that tune? $100 or more?
Also I say you trap 103! just hunch, but we'll see. Does the car feel stronger after the tune? And could you get me the # for germanson I'm gonna get in there!!

As for gettin kicked off at POMONA you need a helmet for 13.99. I got 4 runs in before they sent me back for not having one. Is carlsbad the same? if so I need one to borrow!!

As for the A/C it was hot today and I decieded I think I'm going to keep it. Another 40lbs of my front end is just going to make it ride even higher than before...

I think Im gonna ice down my car at the track though and pull the accessory belt completely for 1 run. I heard that gives you 2mph!

Skyler


------------------
-1989 Saleen Mustang #406- (http://www.mustangworks.com/cgi-bin/moi-display.cgi?419)TFS Heads, E-303 Cam, Edelbrock Intake, and more. Added Eibach drag launch springs and 70/30's w/ 50/50's.
0-110MPH In car view (963k) (http://members.aol.com/lskymanl/Saleen1.mpg)
All Throttle through 3 gears! (497k) (http://members.aol.com/lskymanl/saleen2.mpg)
<A HREF="http://members.aol.com/lskymanl/burnout.mpg" TARGET=_b

[Kevin Price]

The gathering sounds great guys, hope you all have fun. This really isn't about street racing and it has gone on for quite some time. It has come down to a discussion between a few.

Since most of this can be handled via email I am going to close it here.

Thread closed

------------------
SVO siamesed 351 stroked to 417ci,Yates heads, solid roller,Trans King glide and a little blue bottle
of giggle gas. My Car (http://www.mustangworks.com/cgi-bin/moi-display.cgi?199)