carlsbad...30 june

[ed1371]

anyone up to going?
Skye is in (as long as his roll cage is installed by then!)
Grover from the corral is in...
me http://www.mustangworks.com/msgboard/biggrin.gif
anyone else?

[withamc]

If I don't have anything else going, I'm in.

[KenI]

I'll try to make it.

------------------
------------------
95 Blown Cobra
#83 of 4005
:)
------------------

[Skyman]

Im in. http://www.mustangworks.com/msgboard/smile.gif As you know. Famoso sounds way too hot.

Skyler

------------------
-1989 Saleen Mustang #406- (http://www.mustangworks.com/cgi-bin/moi-display.cgi?419)
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 150 shot of N20.
12.55@107 Motor

[ed1371]

kick *** , about 5 more from the corral have jumped in too. just need to figure out a place to meet right before hitting the gate.


Hey fastang, you in?

[ed1371]

Originally posted by withamc:
If I don't have anything else going, I'm in.

check your PM's


------------------
My Mustang (http://www.mustangworks.com/cgi-bin/moi-display.cgi?808)
91 LX Conv. 52,000 orig mi. Hurst shifter,King Cobra clutch, 3.55 grs, NOS 150 kit, MSD 6al, MSD timing control, malory coil, pullies, adj fuel reg, BBK 70mm tb, Pro-m 75mm maf, battery in trunk, JBA: shorties,subs,strut tower brc, Comp eng. 6 point cage, dynomax 2 1/2" exhaust, Hotchkis lower cntrl arms, MAC cold air kit, off road h pipe.

[fastang]

If I get my fuel pump installed and the car tuned I'll go too.

[ed1371]

hope you make it jesse!

[withamc]

Can't make it after all. Family's in town, I'll have to go another time. ed1371 - I'll e-mail you as soon as I have a chance.

[Patrick Boetticher]

when??????
i need to go BAAAAAAD i need to see what this beast can do!!! seems to be running VERY good right now... the only thing i can do out here with out getting busted for speeding is a 0-60mph... huge difference for when i fist got the car

5.3 seconds now
6.7 stock

so i need to find out what else it can do with a little minor tuning...

------------------
ALL NEW PPG Torch Red 95GT, 304ci block, Forged pistons, Ported Explorer Intake, E-303 cam, fully ported and polished and milled E-7 heads, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, PBR twin piston calipers, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 24# Racing Injectors, AFS 10.5" Cobra R's, Nit

[D&R Stang]

Ed, as I told you before in a PM, I'll be there but I can't run the stang because some idiot hit the side of my car and I'm getting it fixed. I talked to Smith yesterday and he told me he's definately in. It should be a good show. I'll finally get to put some faces to these names I see on here every day.

Where are we all gonna meet?
Dave

------------------
Dave & Robin 88 GT, T5
306, polished crank, TRW pistons, underdrive pulleys, cold air induction, 73mm MAF, Xtreme Energy Cam, 3.73's, 1 5/8 unequal length headers, Offroad H-pipe, 2 chamber flowmasters, turn-downs, King Cobra Clutch, Steeda adjustable clutch cable with firewall adjuster

[USMC302]

I'll be there with an 88 blue coupe with a rusted black hood on it with draglites, bringing 5 other mustang buddies with there cars too. So yall can look for us we will have a red 86 with draglites, a white gt with the saleen wing and a stocker silver lx hatch and an 83 with t-tops. See you there, we will most likely be watching though.

------------------
88LX NOTCH, 88GT, 95 GT.

[smokedchevy]

Damn!! I missed it again. I just read this post today and I need about a week beforehand to get the day off from work. I ran a 15.77 at 88mph at LACR and since I've got a six pound supercharger on my ride. I'm burning to try it but not at LACR. Let me know next time guys!!

[ed1371]

dave, I am kinda leaning toward meetin at the target parking lot off the 78 right before the track. anyone else have somewhere better? I just pulled it out my a$$ ..dont care where as long as we all pull in together...
I will call Cpl Smith so we can drive out together on Sat.

[This message has been edited by ed1371 (edited 06-28-2001).]

[ed1371]

Originally posted by USMC302:
I'll be there with an 88 blue coupe with a rusted black hood on it with draglites, bringing 5 other mustang buddies with there cars too. So yall can look for us we will have a red 86 with draglites, a white gt with the saleen wing and a stocker silver lx hatch and an 83 with t-tops. See you there, we will most likely be watching though.



Why not race?

[D&R Stang]

Target sounds good to me. What time did all of you want to meet?

[Skyman]

:'( :'( :'( :'( :'( :'(

They aren't going to be done with the cage untill saturday or monday... I want to go! We have to go again soon so I can make it.

Sky

------------------
-1989 Saleen Mustang #406- (http://www.mustangworks.com/cgi-bin/moi-display.cgi?419)
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.55@107 Motor

[00'BlackSteed]

Hey I'm down to roll! I've never been there so I need to know where it's at, What time does it open and close, and how much does it cost? If they are online please send me a link.

------------------
00'GT,(S281 clone),3 chamber flows,K&N filter,BBK underdrive pulleys & 3.73 gears. No time slip as of yet(est.13.7-13.9)

[Patrick Boetticher]

sky- whos doing it?

[ed1371]

OK, I will be in the target parking lot (off 78) If you dont know what my car looks like, got to my website at www.geocities.com/brandx99 (http://www.geocities.com/brandx99)

its a light blue 91 vert lx with a roll bar

I will be there at 12:00 until 12:20 to wait for ppl...

-ed



------------------
My Mustang (http://www.mustangworks.com/cgi-bin/moi-display.cgi?808)
91 LX Conv. 52,000 orig mi. Hurst shifter,King Cobra clutch, 3.55 grs, NOS 150 kit, MSD 6al, MSD timing control, malory coil, pullies, adj fuel reg, BBK 70mm tb, Pro-m 75mm maf, battery in trunk, JBA: shorties,subs,strut tower brc, Comp eng. 6 point cage, dynomax 2 1/2" exhaust, Hotchkis lower cntrl arms, MAC cold air kit, off road h pipe.

[00'BlackSteed]

ED

What kind of times were you running today? I was out there in a Blk Stang with a saleen conv. kit.

------------------
00'GT,(S281 clone),3 chamber flows,K&N filter,BBK underdrive pulleys & 3.73 gears. No time slip as of yet(est.13.7-13.9)

[Skyman]

bottle blown racing in camarillo.


------------------
-1989 Saleen Mustang #406- (http://www.mustangworks.com/cgi-bin/moi-display.cgi?419)
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.55@107 Motor

[D&R Stang]

Hey Steed, I saw you out there. It was a nice day, but NO traction.

------------------
Dave & Robin 88 GT, T5
306, polished crank, TRW pistons, underdrive pulleys, cold air induction, 73mm MAF, Xtreme Energy Cam, 3.73's, 1 5/8 unequal length headers, Offroad H-pipe, 2 chamber flowmasters, turn-downs, King Cobra Clutch, Steeda adjustable clutch cable with firewall adjuster

[ed1371]

Of course the "150 shot curse" hit again sat, when I gave the guy the paperwork I was opening my bottle...well he "checks" the mounts and pulls on the bottle. Now I used cheap plywood to mount the brackets to it and because I didn't use washers, the bolts came though the freaking wood! They made me yank the bottle before I could race...I was pissed.

Got 2 dry runs out of the way (14.7/14.8) and said screw it...I snuck the bottle back in.

ran good off the line, but the n20 wasnt kicking in late 2nd through the rest of the run...ran a horrible 14.01 @97
my best on an 80 shot was 13.6@ 107
I looked at my bottle after and because the stupid brackets were pulled, it had layed it flat (its already on a bad angle so being flat didn't help!)

but I had a good time, my parents liked it and I am going back on the 14th to get a FULL DAMN RUN WITH THIS PIG! lol
Thats 3 times something happened...(I made sure my lines were tight this time!)

sorry so long...

[Skyman]

Damn Ed, that sucks! What bad luck everytime. How come you only ran an 80 shot though? 106mph is damn good for just an 80 shot. W/ some traction thats deep into the 12's.

I wanted to go so bad... how crowded was it? How was the temp?

Who else was there?

Skyler

------------------
-1989 Saleen Mustang #406- (http://www.mustangworks.com/cgi-bin/moi-display.cgi?419)
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.55@107 Motor

[ed1371]

I only ran one run with nitrous set at 150...I posted my best run with the 80 shot for comparison to show just how messed up it was that day...

[00'BlackSteed]

It was my first time to Carlsbad and traction was a problem. I ran two runs 14.7/14.3 and then I let my friend try one run in my car and he got a 14.2(better driver).I know my car(or I) can do better than that but i'll just take it as a learning experience.

------------------
00'GT,(S281 clone),3 chamber flows,K&N filter,BBK underdrive pulleys & 3.73 gears. No time slip as of yet(est.13.7-13.9)

[00'BlackSteed]

Oh by the way, for those of you who were out there saturday, my friend was the one who tried to stage with his rear wheels. It was so funny that we got it on tape.

------------------
00'GT,(S281 clone),3 chamber flows,K&N filter,BBK underdrive pulleys & 3.73 gears. No time slip as of yet(est.13.7-13.9)

[ed1371]

DAMN I MISSED THAT lol...too funny...did we speak briefly blacksteed?
I was a little preoccupied with making sure my parents werent baking in the sun and talking to some marines I know that came out.

[00'BlackSteed]

ED

We may have, but by the description of your car, I don't think so. I don't remember talking to anybody with a convert. stang. But next time we all roll out I'll be sure to speak.

------------------
00'GT,(S281 clone),3 chamber flows,K&N filter,BBK underdrive pulleys & 3.73 gears. No time slip as of yet(est.13.7-13.9)