New member, got track times.

Itgoez · 08-05-2001, 11:59 PM

finally got to the track. my best was an 8.79@156mph. i ran a big block camaro on saturday night for cash and whooped him. he went something like 10 flat at around 130mph. we ran on the street and i killed him. my car surorised the heck out of me, i knew it was fast but not 8's. 7 years later and i guess time does pay. like the site guys keep it up.

BowTie Eater 5 Liter · 08-06-2001, 12:24 AM

WELCOME!!!!

Geez. What Do You HAve Under That Hood???

You Need To Get Your Signature Running So I Can See What Kinda Stuff You Got.

Awesome Run!!1

------------------
1988 Mustang GT, T-5
3.08's, No Smog Pump (Shorty Belt), Dumps At The End Of Stock H-Pipe, K&N Air Filter (Stock Air Box), Removed Air SilencerMy Stang
My Site (Not Done Yet)

StoplightWarrior · 08-06-2001, 01:03 AM

You're running your 8.79 second car on the street??? What magazines can we see your car in?

What you got done to it?

------------------
Black 2000 GT
Bassani X-pipe, Magnaflow Mufflers, Steeda Pulleys, K&N Filter. Steeda Weld in Subframes, Strut Tower brace, Sport Springs, Caster/Camber Plates.

lx mike · 08-06-2001, 07:52 AM

A race car on the streets.

------------------
93-LX: 5 Speed, Flow's with H-Pipe, 3.73's, C&L 76MM Kit, Sub's and K&N.
14.85 @95.83

Dark_5.0 · 08-06-2001, 09:27 AM

Damn it!!!!! thanks alot man. You just clogged up my "bull sh!t" filter.

Itgoez · 08-06-2001, 02:26 PM

514 cid, 14:1 comp, Comp Cams solid roller (custom grind), Blue Thunder heads, Comp Cams valve train w/Diamond pushrods. Doug Nash 4+1 crash box. CE 4 link 9" w/4.88 gears. It's in a 88 LX hatchback. Not really much of a street car but that's what it's intended for. Not alot of people believed it would run, but we showed them. I'll get my signature done when I get more time.

Dark_5.0 · 08-06-2001, 03:03 PM

So you are telling me that you built an 8 second car in your back yard. Your combo does sound pretty good but are you running with no power adder no Nitrous or supercharger or nothin well if you really are running 8's in a street car than brace yourself cause the word will spread fast and you will end up in a magazine sooner or later.

What would be even better than your signature would be some pics of the engine compartment that damn car must be a beast.

What were your 60ft and 8th mile times and what type of fuel are you running in that thing its gotta take some sort of ultra high dollar jet fuel or something to run those times all motor.

Its one of two things either you know your stuff about motors nd have lots of time and money. Or you have gotten ahold of some killer weed, congratulations either way

------------------
88 mustang gt convertible bored to 306 BBk equal length headers mac cold air fender kit 3.73 FMS gears cowl hood nitto drag radials ford racing clutch flow masters h-pipe 160* thermostat 16 degrees of timing electric fan off 94' t-bird jacobs electronics cap and wires. Edelbrock 1 1/2 inch drop springs.

lx mike · 08-06-2001, 05:18 PM

Nice street racer u have there.

Quote:

So you are telling me that you built an 8 second car in your back yard

he didn't say he did, just said what he had in the car.

Quote:

its gotta take some sort of ultra high dollar jet fuel

about 110-114 octane very expensive $$

what track did you run at? you said your best run was 8.79 so i take it you have the rquired safety equipment for those times??

jonnyk · 08-06-2001, 06:12 PM

Sounds like an awesome machine! That's a lot of cubes. Welcome to the board - we hope you enjoy it here!

------------------
'91 LX Hatch, 17 ROH ZR6's, lowered, 3.73's, offroad H pipe, SN Cobra cat-back, ASP pullies, 14° timing, C&L 76mm MAF, 170A 3G, B&M Ripper on a T5
Best ET: 14.593 Best MPH: 95.72 (75°, 75% hum., 2200')
1991 LX Hatch 5.0L

Stang Runner · 08-06-2001, 07:03 PM

You need some pic. of the car! Sounds sweet!!

08-07-2001, 03:36 AM

Quote:

Originally posted by 5.0 HO:
...but are you running with no power adder no Nitrous or supercharger or nothin

He has a big power adder 514cid

...well if you really are running 8's in a street car than brace yourself cause the word will spread fast and you will end up in a magazine sooner or later.

Probably isn't street legal or easy to drive daily either

...What would be even better than your signature would be some pics of the engine compartment that damn car must be a beast.

I would like to see that too

... and what type of fuel are you running in that thing its gotta take some sort of ultra high dollar jet fuel or something to run those times all motor.

LS1s are doing 144mph or stock configuration fuel systems (ie lines, rails etc) I don't think he will need anything more than larger rails, lines and big injector/pump. Stll a little high doller, but not as much as U may think.

...Its one of two things either you know your stuff about motors nd have lots of time and money. Or you have gotten ahold of some killer weed, congratulations either way

Don't jump over someone until he has proven himself to be a troll. Remember? innocent until proven guilty

Well if a stroked small block windsor (408 solid roller) can pull 135-140mph on pump gas, drivability in the range of heads and cam 5.0, and over 3000ibs. I do not see the reason to doubt this guys story unless he proves otherwise.

------------------
Black SN95
TFS heads, Holley intake, AFM B-2 cam,
13.8 @105mph NA
13.1 @112mph NOS on Wet track, running on NOS setting on NA runs (pig rich and 8 deg timing, CLOGGED CATS)
<B>12.9 @110mph best ET

[This message has been edited by blkrain (edited 08-07-2001).]

08-07-2001, 03:40 AM

checking out new sig to see if it works finally!!!

------------------
Black SN95
TFS heads, Holley intake, AFM B-2 cam,
12.9 @110mph best ET
13.06 @111mph best MPH After gutting out clogged cats and a much better tune. Took Nitrous out for warranty work

didn't have time to put back in for track.

Dark_5.0 · 08-07-2001, 07:59 AM

I am not jumping on him I am giving him the benifit of the doubt.

This guy that I work with builds racing engines and one of his clients has a car that runs in the 7's and this thing has tons of cash poored into it the heads alone costed $12,000.00 and that was for some 3 year old NHRA technology. Lets put it this way the guy has well over 100,000 dollars in the car. I just dont think that there is any way that you put the kind of cash it takes in a car to run 8's unless you are a professional racer or something. I dont know he might be a pro or maybe he just takes his drag racing very seriously.

I would love to see some pics

------------------
88 mustang gt convertible bored to 306 BBk equal length headers mac cold air fender kit 3.73 FMS gears cowl hood nitto drag radials ford racing clutch flow masters h-pipe 160* thermostat 16 degrees of timing electric fan off 94' t-bird jacobs electronics cap and wires. Edelbrock 1 1/2 inch drop springs.

[This message has been edited by 5.0 HO (edited 08-07-2001).]

08-07-2001, 12:17 PM

5.0, i can buy a car that runs high 8's for $14,000.00..... the guy has time slips for 9's with the old engine, and it has a new motor that puts out 150-200 more hp...

but after careful consideration, there is no way i could justify it..

it can be driven on the street, but the range is about 60 miles (with no racing)(3 miles to the gallon on racing fuel gets expensive)

by the way, what defines a "street car"??

------------------
Black,84 GT,ground effects,shorty headers, 'open' dual exh.,302 HO(no pollution control crap),T5,89 ported heads,edelbrock Performer manifold, Edelbrock 2122 cam,600 Holley, high volume oil pump...

Some day (3:73 gears & N2O)!!!

will this ever end????

Itgoez · 08-07-2001, 12:33 PM

I've got the car sitting in my barn. I just had this computer given to me and have heard about this site. Seems to be a few non beleivers.
5.0 if your buddy has 12,000 (18,000 Cdn.) into his heads and 100,000 (150,000 Cdn.) into his car I think he's a little more serious than me. It took me seven years to build my car.

Dark_5.0 · 08-07-2001, 12:52 PM

Quote:

Originally posted by Itgoez:
I've got the car sitting in my barn. I just had this computer given to me and have heard about this site. Seems to be a few non beleivers.
5.0 if your buddy has 12,000 (18,000 Cdn.) into his heads and 100,000 (150,000 Cdn.) into his car I think he's a little more serious than me. It took me seven years to build my car.

You seem like an honest guy to tell you the truth I think I do believe but i would still love to se some pics or a time slip or something not cause I dont believe but cause I think that it would be cool to see.

All I have to say is damn that must be alot of fun. The fastest car that I have ever been in runs an 11.73 and that felt damn fast to me.

Having an 8 second car would be cool beyond words. after seven years of work it must have been nice to see all that hard work pay off.

------------------
88 mustang gt convertible bored to 306 BBk equal length headers mac cold air fender kit 3.73 FMS gears cowl hood nitto drag radials ford racing clutch flow masters h-pipe 160* thermostat 16 degrees of timing electric fan off 94' t-bird jacobs electronics cap and wires. Edelbrock 1 1/2 inch drop springs.

silver_pilate · 08-07-2001, 02:49 PM

Itgoez,

Welcome to the boards!!

Please don't take any offense if some of the guys seem a little skeptical. You've got to realize that we see a few trolls on here every once and a while, and it's not every day you see a member with a bonified 8 second car.

Damn! That must be fast. I can't even imagine.

I'm with the other guys...I'd love to see some pics.

Anyway, once again welcome to the board. I know you'll find this to be the best site on the web.

--nathan

------------------
--silver_pilate

'91 GT, Built 306, Wolverine 1087 cam, ported Windsor Jr. Irons, and all the goodies...click the link to the left to see a full list of my mods...

Tried and True 302 Being Built to Outrun You! heh heh heh...
--Texas Panhandle--
Check out my site

fastang · 08-07-2001, 03:10 PM

The car sounds mean. When did you buy the Blue Thunder heads? Why did it take 7 years?

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

86GT · 08-07-2001, 03:56 PM

8s? Whoa, that's gotta have some insane amount of power. That can't much of a street car at all, hope you've got a good trailer, but it must have been fun to build. 7 years is a long time, and now to see it all together must be worthwhile. I only wish I had the resources and skill to build something like that monster.

Get some pics up, I'd like to see what it looks like..

87vert351 · 08-07-2001, 04:45 PM

I have no doubt the combo Itgoez has listed goes 8's. As far as it being streetable that is really what the owner is willing to put up with. A 14:1 stroked big block with a solid roller and a nash in it will be drivable. Of course the valve springs won't last long and that solid cam will always want/need to be adjusted.(still can drive it though) It seems a lot of people here think it's impossible to go 8's. I know a guy with a stroked 351(400+) with a pro-shifted tremec that is going 9.60's naturally and he drives it. It's a car built for street racing. These guys make a living at this 1/2 grand a race is the norm for these guys. I've seen cars in the 8's race for 5 grand on the street. Heck if you're not going 9's with your street car these days you're nobody in a street racing circle.

------------------
351w, tremec trans Best N/A Pass 11.44@120 Best Nitrous Pass 10.62@132

08-05-2001, 11:59 PM	#1
Itgoez Registered Member Join Date: Aug 2001 Posts: 744	New member, got track times. finally got to the track. my best was an 8.79@156mph. i ran a big block camaro on saturday night for cash and whooped him. he went something like 10 flat at around 130mph. we ran on the street and i killed him. my car surorised the heck out of me, i knew it was fast but not 8's. 7 years later and i guess time does pay. like the site guys keep it up.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1st time at track.....my times	90lxracer	Stang Stories	6	12-05-2002 05:37 PM
Track Times With the new Tires!!!!!	Stang Runner	Stang Stories	6	10-20-2002 08:31 PM
I need help with Track Times???	steedamustang01	Windsor Power	1	10-04-2002 01:52 PM
New track times II	Five0	Windsor Power	9	10-04-2001 05:04 PM
Track Times Down After Mods	PeTr0	Windsor Power	11	07-28-2001 03:55 PM

08-06-2001, 12:24 AM	#2
BowTie Eater 5 Liter Registered Member Join Date: Nov 2000 Location: Maple Ridge B.C. Canada, The Best Place In The World Posts: 871	WELCOME!!!! Geez. What Do You HAve Under That Hood??? You Need To Get Your Signature Running So I Can See What Kinda Stuff You Got. Awesome Run!!1 ------------------ 1988 Mustang GT, T-5 3.08's, No Smog Pump (Shorty Belt), Dumps At The End Of Stock H-Pipe, K&N Air Filter (Stock Air Box), Removed Air SilencerMy Stang My Site (Not Done Yet)

08-06-2001, 01:03 AM	#3
StoplightWarrior Registered Member Join Date: Jun 2000 Location: Nor-Cal Posts: 1,311	You're running your 8.79 second car on the street??? What magazines can we see your car in? What you got done to it? ------------------ Black 2000 GT Bassani X-pipe, Magnaflow Mufflers, Steeda Pulleys, K&N Filter. Steeda Weld in Subframes, Strut Tower brace, Sport Springs, Caster/Camber Plates.

08-06-2001, 07:52 AM	#4
lx mike Undescribable Join Date: Sep 1998 Location: Ft Myers Fla Posts: 1,539	A race car on the streets. ------------------ 93-LX: 5 Speed, Flow's with H-Pipe, 3.73's, C&L 76MM Kit, Sub's and K&N. 14.85 @95.83

08-06-2001, 09:27 AM	#5
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Damn it!!!!! thanks alot man. You just clogged up my "bull sh!t" filter.

08-06-2001, 02:26 PM	#6
Itgoez Registered Member Join Date: Aug 2001 Posts: 744	514 cid, 14:1 comp, Comp Cams solid roller (custom grind), Blue Thunder heads, Comp Cams valve train w/Diamond pushrods. Doug Nash 4+1 crash box. CE 4 link 9" w/4.88 gears. It's in a 88 LX hatchback. Not really much of a street car but that's what it's intended for. Not alot of people believed it would run, but we showed them. I'll get my signature done when I get more time.

08-06-2001, 03:03 PM	#7
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	So you are telling me that you built an 8 second car in your back yard. Your combo does sound pretty good but are you running with no power adder no Nitrous or supercharger or nothin well if you really are running 8's in a street car than brace yourself cause the word will spread fast and you will end up in a magazine sooner or later. What would be even better than your signature would be some pics of the engine compartment that damn car must be a beast. What were your 60ft and 8th mile times and what type of fuel are you running in that thing its gotta take some sort of ultra high dollar jet fuel or something to run those times all motor. Its one of two things either you know your stuff about motors nd have lots of time and money. Or you have gotten ahold of some killer weed, congratulations either way ------------------ 88 mustang gt convertible bored to 306 BBk equal length headers mac cold air fender kit 3.73 FMS gears cowl hood nitto drag radials ford racing clutch flow masters h-pipe 160* thermostat 16 degrees of timing electric fan off 94' t-bird jacobs electronics cap and wires. Edelbrock 1 1/2 inch drop springs.

08-06-2001, 06:12 PM	#9
jonnyk Being stroked is great Join Date: Oct 1998 Location: Alberta, Canada Posts: 772	Sounds like an awesome machine! That's a lot of cubes. Welcome to the board - we hope you enjoy it here! ------------------ '91 LX Hatch, 17 ROH ZR6's, lowered, 3.73's, offroad H pipe, SN Cobra cat-back, ASP pullies, 14° timing, C&L 76mm MAF, 170A 3G, B&M Ripper on a T5 Best ET: 14.593 Best MPH: 95.72 (75°, 75% hum., 2200') 1991 LX Hatch 5.0L

08-06-2001, 07:03 PM	#10
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	You need some pic. of the car! Sounds sweet!!

08-07-2001, 03:40 AM	#12
blkrain Guest Posts: n/a	checking out new sig to see if it works finally!!! ------------------ Black SN95 TFS heads, Holley intake, AFM B-2 cam, 12.9 @110mph best ET 13.06 @111mph best MPH After gutting out clogged cats and a much better tune. Took Nitrous out for warranty work didn't have time to put back in for track.

08-07-2001, 07:59 AM	#13
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	I am not jumping on him I am giving him the benifit of the doubt. This guy that I work with builds racing engines and one of his clients has a car that runs in the 7's and this thing has tons of cash poored into it the heads alone costed $12,000.00 and that was for some 3 year old NHRA technology. Lets put it this way the guy has well over 100,000 dollars in the car. I just dont think that there is any way that you put the kind of cash it takes in a car to run 8's unless you are a professional racer or something. I dont know he might be a pro or maybe he just takes his drag racing very seriously. I would love to see some pics ------------------ 88 mustang gt convertible bored to 306 BBk equal length headers mac cold air fender kit 3.73 FMS gears cowl hood nitto drag radials ford racing clutch flow masters h-pipe 160* thermostat 16 degrees of timing electric fan off 94' t-bird jacobs electronics cap and wires. Edelbrock 1 1/2 inch drop springs. [This message has been edited by 5.0 HO (edited 08-07-2001).]

08-07-2001, 12:17 PM	#14
jerryIII Guest Posts: n/a	5.0, i can buy a car that runs high 8's for $14,000.00..... the guy has time slips for 9's with the old engine, and it has a new motor that puts out 150-200 more hp... but after careful consideration, there is no way i could justify it.. it can be driven on the street, but the range is about 60 miles (with no racing)(3 miles to the gallon on racing fuel gets expensive) by the way, what defines a "street car"?? ------------------ Black,84 GT,ground effects,shorty headers, 'open' dual exh.,302 HO(no pollution control crap),T5,89 ported heads,edelbrock Performer manifold, Edelbrock 2122 cam,600 Holley, high volume oil pump... Some day (3:73 gears & N2O)!!! will this ever end????

08-07-2001, 12:33 PM	#15
Itgoez Registered Member Join Date: Aug 2001 Posts: 744	I've got the car sitting in my barn. I just had this computer given to me and have heard about this site. Seems to be a few non beleivers. 5.0 if your buddy has 12,000 (18,000 Cdn.) into his heads and 100,000 (150,000 Cdn.) into his car I think he's a little more serious than me. It took me seven years to build my car.

08-07-2001, 02:49 PM	#17
silver_pilate DURKA DURKA!! Join Date: Sep 1997 Location: Lubbock, TX...(TX panhandle) Posts: 1,418	Itgoez, Welcome to the boards!! Please don't take any offense if some of the guys seem a little skeptical. You've got to realize that we see a few trolls on here every once and a while, and it's not every day you see a member with a bonified 8 second car. Damn! That must be fast. I can't even imagine. I'm with the other guys...I'd love to see some pics. Anyway, once again welcome to the board. I know you'll find this to be the best site on the web. --nathan ------------------ --silver_pilate '91 GT, Built 306, Wolverine 1087 cam, ported Windsor Jr. Irons, and all the goodies...click the link to the left to see a full list of my mods... Tried and True 302 Being Built to Outrun You! heh heh heh... --Texas Panhandle-- Check out my site

08-07-2001, 03:10 PM	#18
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	The car sounds mean. When did you buy the Blue Thunder heads? Why did it take 7 years? ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

08-07-2001, 03:56 PM	#19
86GT Sniffed too much n20 Join Date: Oct 1998 Location: Ont, Canada Posts: 1,018	8s? Whoa, that's gotta have some insane amount of power. That can't much of a street car at all, hope you've got a good trailer, but it must have been fun to build. 7 years is a long time, and now to see it all together must be worthwhile. I only wish I had the resources and skill to build something like that monster. Get some pics up, I'd like to see what it looks like..

08-07-2001, 04:45 PM	#20
87vert351 Registered Member Join Date: Jul 2001 Location: Sterling Heights, MI Posts: 43	I have no doubt the combo Itgoez has listed goes 8's. As far as it being streetable that is really what the owner is willing to put up with. A 14:1 stroked big block with a solid roller and a nash in it will be drivable. Of course the valve springs won't last long and that solid cam will always want/need to be adjusted.(still can drive it though) It seems a lot of people here think it's impossible to go 8's. I know a guy with a stroked 351(400+) with a pro-shifted tremec that is going 9.60's naturally and he drives it. It's a car built for street racing. These guys make a living at this 1/2 grand a race is the norm for these guys. I've seen cars in the 8's race for 5 grand on the street. Heck if you're not going 9's with your street car these days you're nobody in a street racing circle. ------------------ 351w, tremec trans Best N/A Pass 11.44@120 Best Nitrous Pass 10.62@132