302 to a 351w

Arran · 06-29-2005, 05:02 PM

I know you can put a 351c into my 73 c4trans stang. I was woundering if anyone knows about what I would need to do to put the windsor in.

bmxmon · 06-29-2005, 09:48 PM

did they put 302's in the 73s too?? If they did, put in those motor mounts, and 302's and 351w share the same motor mount. As far as the trans and crossmember go im not sure.
-------------
actually, i dont think you even need to change the motor mounts. Checking out the mustangsplus.com online catalog, they show engine mounts for a 65-73 289/302/351c/351w as the same one.

Rev · 06-29-2005, 10:14 PM

I don't really think there's much to do. I believe the headers will even interchange from the 302W to the 351W. Might be some H pipe work to connect the exhaust due to the higher deck height with the 351W.

Rev

06-29-2005, 05:02 PM	#1 (permalink)
Arran Registered Member Join Date: Jun 2005 Posts: 2	302 to a 351w I know you can put a 351c into my 73 c4trans stang. I was woundering if anyone knows about what I would need to do to put the windsor in.

06-29-2005, 09:48 PM	#2 (permalink)
bmxmon Moderator Join Date: Mar 2004 Location: Minnesota Posts: 891	Re: 302 to a 351w did they put 302's in the 73s too?? If they did, put in those motor mounts, and 302's and 351w share the same motor mount. As far as the trans and crossmember go im not sure. ------------- actually, i dont think you even need to change the motor mounts. Checking out the mustangsplus.com online catalog, they show engine mounts for a 65-73 289/302/351c/351w as the same one. __________________ Alex

06-29-2005, 10:14 PM	#3 (permalink)
Rev Registered Member Join Date: Nov 1998 Location: Houston, Tx. Posts: 3,887	Re: 302 to a 351w I don't really think there's much to do. I believe the headers will even interchange from the 302W to the 351W. Might be some H pipe work to connect the exhaust due to the higher deck height with the 351W. Rev __________________ '66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
351W Heads on a 87 302 Block	NitroNixon	Windsor Power	5	05-08-2003 10:29 PM
351w or 347 stroker? which is better?	BLACK85GT	Windsor Power	55	12-21-2002 06:52 PM
351W heads on 289 stock engine	sleeperstang	Classic Mustangs	5	11-21-2002 08:35 PM
351W in a Fox body	greydan	Windsor Power	4	07-03-2002 03:33 PM
HP #'s from a built 351W versus FMS 351 versus stroker	stroker393	Windsor Power	0	03-09-2001 10:24 AM

Sponsored Links