It should be the same as doing a mustang. You
can use the late model bellhouseing but you will need a new pivot for the clutch linkage,
if you use the Z bar setup.
If you use the early model bellhouseing you will need a adapter plate between the bellhousing and transmision.
You can also use the cable clutch linkage that goes in the late model Mustang. I think
Winsor Fox has the setup.
www.windsor-fox.com
Sinse you have a auto transmission now, useing the cable setup might be the way to go.
If not you will have to locate a donor car with a manual trans to get the clutch linkage out of.
Regards,
BillGear