302

zach0 · 07-08-2001, 09:51 AM

Where could I find a 302 long block strong enough to handle a blower/supercharger and maybe a little nitro.

------------------
66 Mustang Black W/ Black
289 Hi-Po 65'heads, MSD
Lunati High lift Cam
750CFM Carb Heddman Headers, Hurst Shifter

Gearhead999 · 07-08-2001, 03:14 PM

Custom built.

You'll need:

1. Good block.
2. Aftermarket "H" beam rods
3. Forged Crank
4. Forged Pistons, try and get them that are made for supercharger/turbo, cause the top ring is lower and compression should be lower too.
5. Main bearing support
6. Screw in freeze plugs
7. Lots of head work.
8. "O" ringed cylinders

That should get you started.

07-08-2001, 09:51 AM	#1
zach0 Registered Member Join Date: Apr 2001 Location: Hampton, Virginia Posts: 227	302 Where could I find a 302 long block strong enough to handle a blower/supercharger and maybe a little nitro. ------------------ 66 Mustang Black W/ Black 289 Hi-Po 65'heads, MSD Lunati High lift Cam 750CFM Carb Heddman Headers, Hurst Shifter

07-08-2001, 03:14 PM	#2
Gearhead999 Registered Member Join Date: Sep 1998 Location: Oviedo, FL Posts: 992	Custom built. You'll need: 1. Good block. 2. Aftermarket "H" beam rods 3. Forged Crank 4. Forged Pistons, try and get them that are made for supercharger/turbo, cause the top ring is lower and compression should be lower too. 5. Main bearing support 6. Screw in freeze plugs 7. Lots of head work. 8. "O" ringed cylinders That should get you started.