347 JE SRP Pistons For Sale

Idhomustang · 01-06-2002, 11:23 PM

Oops!

I placed a order with Probe and it took them quiet a while to fill the order, so I ordered another set of Pistons, from another company they shipped next day, now as you might have quessed I have to complete sets.
They are 4.030 bore, with 1.10 pin location and are for .927 pins new in orginal box. They are good for 5.315 or 5.4 rods, with a 3.40" crank.

I will pay shipping if you would like to pay what I have into they at this point.

$440.00 cash/ cashiers check ok, certified check ok, no CODs.

Mac..

red · 01-07-2002, 07:46 PM

Post belongs in the Classifieds section!

-red

01-06-2002, 11:23 PM	#1 (permalink)
Idhomustang Registered Member Join Date: Sep 1999 Location: boise,idaho Posts: 220	347 JE SRP Pistons For Sale Oops! I placed a order with Probe and it took them quiet a while to fill the order, so I ordered another set of Pistons, from another company they shipped next day, now as you might have quessed I have to complete sets. They are 4.030 bore, with 1.10 pin location and are for .927 pins new in orginal box. They are good for 5.315 or 5.4 rods, with a 3.40" crank. I will pay shipping if you would like to pay what I have into they at this point. $440.00 cash/ cashiers check ok, certified check ok, no CODs. Mac.. __________________ 393,9.5" 351W,830 Holley,Victor Jr,Home made Cool Air Pan, Pro Billet MSD, MSD 6AL, XE 284H Xtr-Com cam, 240-246 @.050, 540-544, M/T Et streets, Mac Upper and Lower, Control Arms, 3:73 US Gear,Mini Spool, Eagle Long rods, Mac Windage tray, KB Pistons, Scat crank, 4000 rpm stall convertor, C-4 trans, Airflow Research 185cc, Hooker long tubes 3", exhaust, S&W 6 point roll cage, 11.2 at 121 mph.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
393 pistons	Ieatcamaros	Windsor Power	0	03-24-2004 10:02 PM
Largest cam in 351W without cutting the pistons (Looking at AFR185s)	Fox Body	Windsor Power	10	06-15-2003 01:39 AM
Cutting valve reliefs into early pistons	QuantumMotorsports	Windsor Power	11	05-14-2003 10:22 PM
Pistons for Larger Valves?	MustangChile	Classic Mustangs	4	02-28-2003 01:27 AM
What type of pistons should i get? :)	chickendreamer	Windsor Power	14	09-12-2002 10:52 PM

01-07-2002, 07:46 PM	#2 (permalink)
red Moderator Join Date: Sep 1998 Location: Millburn, NJ Posts: 308	Post belongs in the Classifieds section! -red

Sponsored Links