Any good muffler shop will be able to bend up a system from the headers back to the tail pipes and adapt a tip style of your choice to the end of the tail pipe that fits into the tip cut out in the rear valance. I personally always use tail pipes, they do a much better job of keeping the exhaust fumes out of the interior, good clean mandrel bends will not cost much hp (esp on a 2 1/2" pipe)and the car will still sound plenty tough esp. with a pair of two chambers. Many of the Mustang vendors also carry pre bent systems for the car for around $250.00 but you would need to adapt the system to the headers, as they are designed to mate up to stock manifolds. Also, these systems are also somewhat small (I beleive 2")in diameter.
|