66 Mustang brake swap

sunshells · 09-22-2002, 06:14 PM

I have a 66 Mustang, 289 engine, power steering, and drum brakes. I have found a 74 Ford Maverick with Disk brakes. It looks as if everything matches up except for the placement of the brake line that I think I can move. Do you think the switch will work?

Thanks,
Leon

Rev · 09-22-2002, 06:32 PM

It will work. You may need different tie-rod ends (outer) or bushings for the spindles. Rebuild the calipers and get the correct MC and an adjustable proportioning valve and you're set. Be sure the actuating rod from the brake lever can't come out of the MC. I had to make a limiting bracket for my '66 to limit rearward travel in order to insure that the rod could not fall out of the MC.

I got the whole kit with all new parts except for rebuilt calipers and bushed Granada spindles from Jim's Mustang in El Cajon CA. for $600 + shipping.

Rev

09-22-2002, 06:14 PM	#1 (permalink)
sunshells Registered Member Join Date: Sep 2002 Location: Calvert City, Ky Posts: 1	66 Mustang brake swap I have a 66 Mustang, 289 engine, power steering, and drum brakes. I have found a 74 Ford Maverick with Disk brakes. It looks as if everything matches up except for the placement of the brake line that I think I can move. Do you think the switch will work? Thanks, Leon

09-22-2002, 06:32 PM	#2 (permalink)
Rev Registered Member Join Date: Nov 1998 Location: Houston, Tx. Posts: 3,887	Yup It will work. You may need different tie-rod ends (outer) or bushings for the spindles. Rebuild the calipers and get the correct MC and an adjustable proportioning valve and you're set. Be sure the actuating rod from the brake lever can't come out of the MC. I had to make a limiting bracket for my '66 to limit rearward travel in order to insure that the rod could not fall out of the MC. I got the whole kit with all new parts except for rebuilt calipers and bushed Granada spindles from Jim's Mustang in El Cajon CA. for $600 + shipping. Rev __________________ '66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for a Mustang	HighHeat	Modular Madness	7	08-20-2002 07:07 PM
power (67 mustang)	lil67pony	Classic Mustangs	1	08-12-2002 05:19 PM
92 mustang lx 2.3L - 351 windsor swap	ekoms	Windsor Power	0	06-10-2001 07:08 PM
Cable clutch swap for old mechanical linkage, any ideas?	Giddy Up	Classic Mustangs	6	10-28-2000 11:25 AM
mustang II/grenada parts swap??	eric simes	Classic Mustangs	2	06-13-1999 11:39 AM

Sponsored Links