MustangWorks.com : Ford Forums - View Single Post

Phillyfanfrombirth · 11-18-2005, 04:35 PM

BTW... you can also double...double check things by rotating the engine by the crank bolt and tightening the valves opposite the valves that are opening...

So, if you see that the exhaust valve is open on any given cylinder, check the intake... and vice versa when the intake is open. This will ensure that the valve SHOULD be perfectly seated.

11-18-2005, 04:35 PM	#3
Phillyfanfrombirth Registered Member Join Date: Dec 2004 Location: South Central PA Posts: 358	Re: 67 Lifter problem BTW... you can also double...double check things by rotating the engine by the crank bolt and tightening the valves opposite the valves that are opening... So, if you see that the exhaust valve is open on any given cylinder, check the intake... and vice versa when the intake is open. This will ensure that the valve SHOULD be perfectly seated.