Can a 93 Reverse Rotation Water Pump work on a '69 351W??

Stang_ROTY · 08-04-2001, 10:37 AM

I'm new to this area of the site and am having a cooling problem on my '69 351 block. I pulled this motor out of a '69 Cougar and it took 9 months to build. I was told by Ford Motorsports tech. that a reverse rotation pump would work on the '69 block but I keep having cooling problems on a fresh rebuild. Thanks.

Gearhead999 · 08-04-2001, 12:55 PM

You're right the pump "will work", but you have to turn it in "reverse". The rotation is backward to the V-belt drive pump that the '69 had. If you change the '69 to a serpentine belt with reverse rotation of the water pump you would be OK.

Stang_ROTY · 08-04-2001, 01:52 PM

Great! So I can eliminate that off one of my potential problems list. I do have the correct serpentine setup but for a 93 5.0 I WAS using a underdrive pulley set that reduced my cooling by 20%. Another waste of money if you ask me. My engine was jumping up to 230 degrees in traffic and under 1500 rpm's, so we started troubleshooting and thought the old block and new pump was the problem. Thanks a lot. I appreciate it.

------------------
Finally DONE!!
93 GT, 393 stroker w/ Edlebrock Performer heads and EFI, 30lb injectors, Dynamic Roller Mite C4, 8 pt cage, Sothside Machine bars & Sub-frames, 3.73's, '69 351W block w/SCAT crank.

08-04-2001, 10:37 AM	#1
Stang_ROTY Registered Member Join Date: Feb 2001 Location: Berkshire County - Massachusetts Posts: 735	Can a 93 Reverse Rotation Water Pump work on a '69 351W?? I'm new to this area of the site and am having a cooling problem on my '69 351 block. I pulled this motor out of a '69 Cougar and it took 9 months to build. I was told by Ford Motorsports tech. that a reverse rotation pump would work on the '69 block but I keep having cooling problems on a fresh rebuild. Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Normal Rotation Water Pump	Mustang_GT_90	Windsor Power	3	07-10-2003 10:38 AM
Major Problem During Water Pump Install	Evil Joe	Windsor Power	27	07-10-2003 03:45 AM
cobra water pump pulley	DemonGT	Windsor Power	2	05-19-2001 05:15 PM
Water pump	rj_stang	Windsor Power	1	03-09-2001 10:58 AM
coolant leak, water pump maybe?	fiveohpatrol	Windsor Power	4	02-04-2001 05:35 PM

08-04-2001, 12:55 PM	#2
Gearhead999 Registered Member Join Date: Sep 1998 Location: Oviedo, FL Posts: 992	You're right the pump "will work", but you have to turn it in "reverse". The rotation is backward to the V-belt drive pump that the '69 had. If you change the '69 to a serpentine belt with reverse rotation of the water pump you would be OK.

08-04-2001, 01:52 PM	#3
Stang_ROTY Registered Member Join Date: Feb 2001 Location: Berkshire County - Massachusetts Posts: 735	Great! So I can eliminate that off one of my potential problems list. I do have the correct serpentine setup but for a 93 5.0 I WAS using a underdrive pulley set that reduced my cooling by 20%. Another waste of money if you ask me. My engine was jumping up to 230 degrees in traffic and under 1500 rpm's, so we started troubleshooting and thought the old block and new pump was the problem. Thanks a lot. I appreciate it. ------------------ Finally DONE!! 93 GT, 393 stroker w/ Edlebrock Performer heads and EFI, 30lb injectors, Dynamic Roller Mite C4, 8 pt cage, Sothside Machine bars & Sub-frames, 3.73's, '69 351W block w/SCAT crank.