70 mach 1 instrument panel

mustangmach1 · 02-05-2005, 08:42 PM

I do not have any working instruments on my instrument panel. There is clearly visible a small black broken wire in the vicinity of the pig tail that plugs into the printed circuit. Does anyone know where this wire connects? I am thinking it must be some sort of power wire that connects into one of the slots on the plug but do not know which one. Thanks.

Orange97GTVert · 02-05-2005, 09:37 PM

First check and see if you have a fuse blown. Then look around where the broken wire is, you should be able to find the other end it broke off from. It should be really close to the pigtail.

mustangmach1 · 02-05-2005, 09:42 PM

Harold,

Thanks for the reply. I took your advise and looked for another broken end but was unable to find one. Could it have possibly pulled out of one of the connecting post? If so how would I be able to tell which one? Other than the obvious that there is not an empty slot. Could there have possibly been two wires going to the same place?
Thanks again for your help.

02-05-2005, 08:42 PM	#1
mustangmach1 Registered Member Join Date: Feb 2005 Posts: 2	70 mach 1 instrument panel I do not have any working instruments on my instrument panel. There is clearly visible a small black broken wire in the vicinity of the pig tail that plugs into the printed circuit. Does anyone know where this wire connects? I am thinking it must be some sort of power wire that connects into one of the slots on the plug but do not know which one. Thanks.

02-05-2005, 09:37 PM	#2
Orange97GTVert Mustang Fanatic Join Date: Dec 2003 Location: Tyler, TX Posts: 568	Re: 70 mach 1 instrument panel First check and see if you have a fuse blown. Then look around where the broken wire is, you should be able to find the other end it broke off from. It should be really close to the pigtail. __________________ Harold Phillips www.mustangsofeasttexas.org 1997 Mustang GT Convertible, 4.6L Auto, Autumn Orange w/Saddle Tan Top & Leather Interior, Styling Bar, 17 X 9 Polished Cobra R's on Nitto NT 555's, Ford Racing Bullitt Suspension package, Mac CAI, Steeda UDP's, Flowmaster 40 Series Catback, SCT X-Calibrator II, Zaino Shine, 7 time Show Winner, driven daily

02-05-2005, 09:42 PM	#3
mustangmach1 Registered Member Join Date: Feb 2005 Posts: 2	Re: 70 mach 1 instrument panel Harold, Thanks for the reply. I took your advise and looked for another broken end but was unable to find one. Could it have possibly pulled out of one of the connecting post? If so how would I be able to tell which one? Other than the obvious that there is not an empty slot. Could there have possibly been two wires going to the same place? Thanks again for your help.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
No Instrument Panel Lights	GhettoPop	Windsor Power	8	12-18-2008 10:10 PM
instrument panel	mithralas	Classic Mustangs	1	06-21-2002 11:58 PM
fading lights on instrument panel	chan	Small Ponies	4	02-24-2002 05:43 PM
in need of instrument panel..	tjustin_moser	Windsor Power	9	10-16-2001 02:13 PM
Removing Instrument Panel	djones	Classic Mustangs	2	07-20-2000 08:39 AM