© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
01-11-2001, 05:08 AM | #1 |
Registered Member
Join Date: Jan 2001
Location: Seattle, WA, USA
Posts: 1
|
302 or 351C?
I have a 67 with a 200 in it now, so obviously my first step is to get a better engine. I guess my first question is how much am I going to have to change over with the 351C, that I can leave the same with the 302? The other question is will the extra work be worth it in the end? I don't expect a list of what I'll need to change, just an idea of what I'm really biting off here. Thanks guys.
|
01-11-2001, 09:18 AM | #2 |
Registered Member
Join Date: Oct 2000
Location: Atlanta,GA,USA
Posts: 278
|
Either way, you will need a new transmission, driveshaft, rear axle, and you will want to switch to 5-lug hubs from the 4-lug that comes on 6cyl cars. I would recommend the 302 over the 351C just because performance parts are much easier to get for the 302 due to the 5.0's popularity. You can get aluminum heads for a 302 very cheap now.
You may want to think about a 351W, It uses the same heads as a 302, but with some extra cubes. ------------------ 67 Fastback - Arctic White Pearl paint 351W ,Trick Flow Aluminum Heads, Edelbrock TorkerII, Comp. Cam, Performance Automatic C-4 Trans, 3.55 gears, Front Disc Brakes, 1-1/8" Fr. 3/4" rear sway bars. My 351W Fastback |
01-11-2001, 09:53 AM | #3 |
Registered Member
Join Date: Feb 1999
Posts: 102
|
The common wisdom on the I6 to V8 swap is that if you want a V8 car, then start with a V8 car. There are considerable differences including radiator, motor mounts, fuel lines, wiring, transmission, drive shaft, rearend, brakes, front suspension and steering components, etc. Either sell the I6 and buy a V8 car or buy a V8 parts car and change components to the I6 car.
If I were going to the trouble to put in a V8, I would go for a 351W. Is it worth it? Probably not if you're planning to sell the car, it would be worth less than a stock V8 car in the same condition. But if you're looking for the fun factor and DIY pride, it can be worth it. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1970 351C 4bbl low plane 2x4 intake | jwmustangin | Classic Mustangs | 3 | 04-17-2002 01:27 PM |
351W or 351C? | A Wild Neg | Windsor Power | 3 | 04-26-2001 03:35 PM |
351C swap???????? | vande97 | Windsor Power | 0 | 04-14-2001 05:22 PM |
Is it worth it 351C to 460 | ASMO | Classic Mustangs | 0 | 04-09-2001 05:37 AM |
Stock 70 351C 4V 4sp 1/4 times? | MrWesson22 | Classic Mustangs | 3 | 01-14-2001 02:22 AM |