MustangWorks.com : Ford Forums - View Single Post - All gauges pegged out-66 Coupe only after I replace a couple of bulbs.?

bears4ever · 03-02-2006, 02:36 PM

Yeah trouble shooting under the dash is not alot of fun. I would check that no other bulb has come loose and is touching one of the gauges. You will propably need a manual to look at the wire diagram. Double check your constant voltage reg that what you have coming in is coming out. Check you connections at the gauges in the back to make sure none are touching and all are in tight. Check your main connections for the bezel that all connectors are tight. If all checks out you may have to remove the bezel and meter out each wire to what has happened. Hope this helps somewhat.

03-02-2006, 02:36 PM	#2
bears4ever Registered Member Join Date: Apr 2004 Location: Canada Posts: 36	Re: All gauges pegged out-66 Coupe only after I replace a couple of bulbs.? Yeah trouble shooting under the dash is not alot of fun. I would check that no other bulb has come loose and is touching one of the gauges. You will propably need a manual to look at the wire diagram. Double check your constant voltage reg that what you have coming in is coming out. Check you connections at the gauges in the back to make sure none are touching and all are in tight. Check your main connections for the bezel that all connectors are tight. If all checks out you may have to remove the bezel and meter out each wire to what has happened. Hope this helps somewhat.