MustangWorks.com : Ford Forums - View Single Post

orlowted · 03-05-2004, 05:32 PM

Thanks for the advice - I think I will start with the door jambs and such first and see if I can rule out the obvious. It sounds like good advise before I replace the wiring (although it is in the plans for next winter). Thanks for the tip about the negative wire suggestion...If i do the test and I get no current with the negative removed and the meter between them does that mean there is not a draw. Should I do this with the car running and not running. What would be the next step if the test proves negative and there is not a draw. You guys should charge for this advise...It is very helpful
Thanks again!

03-05-2004, 05:32 PM	#4
orlowted Registered Member Join Date: Oct 2003 Location: Fleetwood, PA Posts: 177	I will start with the simple areas Thanks for the advice - I think I will start with the door jambs and such first and see if I can rule out the obvious. It sounds like good advise before I replace the wiring (although it is in the plans for next winter). Thanks for the tip about the negative wire suggestion...If i do the test and I get no current with the negative removed and the meter between them does that mean there is not a draw. Should I do this with the car running and not running. What would be the next step if the test proves negative and there is not a draw. You guys should charge for this advise...It is very helpful Thanks again!