306 or 331 - best place to get?

injectedEB · 10-25-2001, 12:56 PM

I need a new short block and would like to know the best place to get one. I would like a 331 or 306 set up for TW heads. I already have the cam and everything needed, just turns out my block and a piston are un-reusable. I'd do it myself with another block, but I don't know/trust the machine shops near me. Also, if possible I am looking for it to be built with a non-roller mexican block.

SaleenGTS · 10-25-2001, 11:04 PM

I think either Coast, D.S.S., or Keith Craft are great manufacturers. Coast has a warranty too. Go 347....same price from Coast.

------------------
Dustin
89 Saleen GT Sport,347, TFS Street Heat Intake(port matched),TFS TW Heads(Stage 2),TFS #2 cam,BD-11A 9 psi,Crane 1.6 rr's,BBK 70mm TB,Pro-M 80mm MAF,MSD 6BTM, FMS 9mm wires,BBK longtubes,BBK Short H-pipe,American Thunder cat back,3.55's

12.3@119 street tires OLD MOTOR

11.496@121.08slicks OLD MOTOR

Mont · 10-25-2001, 11:11 PM

I've had both and I liked the 306, mine were blown and i would say the 306 ran harded then the 331, then I when with a 351 and I'll never go back to a 5.0 Call D.S.S their good to work with and I think they can help you out with your Ideas

------------------
89 LX Supercharged DSS 357, 11 lbs Powerdyne, Downs Box intake, ported GT-40x heads, lockwired, Crane Cam 1.6 rockers, Crower cam, Oil cooler, Moroso oil evac kit, Taylor 10mm wires, MAC 70mm T/B, 36lb injectors, Vortech fuel rails, Pro M 80mm Mass air, Vortech T-Rex Fuel pump, 255lph intank pump, K&N, Cobra R radiator MSD6-BTM, Lakewood bellhousing, Tremec Trans, Pro 5.0 shifter, MAC headers and X-pipe, Dynomax race mufflers. Dyno at 519hp to the wheels. And more to come.....

injectedEB · 10-25-2001, 11:49 PM

Thanks for the replies, I'll eventruly be going 408-427, but can't afford it right now.

vande97 · 10-26-2001, 03:04 AM

Get ahold of jim shaffer at Indy Mustang, they have many stroker motors and also have a couple diff 306 to choose from i bought a 306 myself and i love it, it runs like a champ!

10-25-2001, 12:56 PM	#1
injectedEB Registered Member Join Date: Mar 2001 Location: Broomfield, CO Posts: 18	306 or 331 - best place to get? I need a new short block and would like to know the best place to get one. I would like a 331 or 306 set up for TW heads. I already have the cam and everything needed, just turns out my block and a piston are un-reusable. I'd do it myself with another block, but I don't know/trust the machine shops near me. Also, if possible I am looking for it to be built with a non-roller mexican block.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best Place to Buy Cobra R Wheels? Fitment?	ChunkFunky	Blue Oval Lounge	5	05-22-2003 05:44 PM
Where is the best place to get a starter?	ajcolv	Modular Madness	0	04-29-2003 12:04 PM
Place of horn relay?	msisido	Windsor Power	13	04-30-2002 01:18 PM
Good Place to Order Flows From..?	RedLilPony	Blue Oval Lounge	7	11-02-2001 08:43 AM
LARGEST MODULAR RACING PURSE EVER IS RELEASED	Dave King	Modular Madness	0	04-02-2000 07:45 AM

10-25-2001, 11:04 PM	#2
SaleenGTS RICE taste like Chicken Join Date: Jun 2000 Location: Edmond, OK Posts: 687	I think either Coast, D.S.S., or Keith Craft are great manufacturers. Coast has a warranty too. Go 347....same price from Coast. ------------------ Dustin 89 Saleen GT Sport,347, TFS Street Heat Intake(port matched),TFS TW Heads(Stage 2),TFS #2 cam,BD-11A 9 psi,Crane 1.6 rr's,BBK 70mm TB,Pro-M 80mm MAF,MSD 6BTM, FMS 9mm wires,BBK longtubes,BBK Short H-pipe,American Thunder cat back,3.55's 12.3@119 street tires OLD MOTOR 11.496@121.08slicks OLD MOTOR

10-25-2001, 11:11 PM	#3
Mont Registered Member Join Date: Aug 2000 Location: Bountiful, UT Posts: 91	I've had both and I liked the 306, mine were blown and i would say the 306 ran harded then the 331, then I when with a 351 and I'll never go back to a 5.0 Call D.S.S their good to work with and I think they can help you out with your Ideas ------------------ 89 LX Supercharged DSS 357, 11 lbs Powerdyne, Downs Box intake, ported GT-40x heads, lockwired, Crane Cam 1.6 rockers, Crower cam, Oil cooler, Moroso oil evac kit, Taylor 10mm wires, MAC 70mm T/B, 36lb injectors, Vortech fuel rails, Pro M 80mm Mass air, Vortech T-Rex Fuel pump, 255lph intank pump, K&N, Cobra R radiator MSD6-BTM, Lakewood bellhousing, Tremec Trans, Pro 5.0 shifter, MAC headers and X-pipe, Dynomax race mufflers. Dyno at 519hp to the wheels. And more to come.....

10-25-2001, 11:49 PM	#4
injectedEB Registered Member Join Date: Mar 2001 Location: Broomfield, CO Posts: 18	Thanks for the replies, I'll eventruly be going 408-427, but can't afford it right now.

10-26-2001, 03:04 AM	#5
vande97 Registered Member Join Date: Jan 2001 Location: okemos Posts: 205	Get ahold of jim shaffer at Indy Mustang, they have many stroker motors and also have a couple diff 306 to choose from i bought a 306 myself and i love it, it runs like a champ!