Bolts: What Grade And Length ? ? ?

SCHOONER · 11-29-2005, 11:07 PM

HI GUYS

GUESS WHO

WELL I GOT ME ENGINE HOIST AND LEVELER. GOT MY ENGINE STAND TODAY.

ALL I NEED TO KNOW IS THE SIZE BOLTS AND GRADE TO LIFT THAT SUCKER (engine) OUT MY CAR

ONE OF YOU GUYS SAID SOMETHING ABOUT GETTING A GRADE 8
OR WAS IT GRADE B BOLTS TO ATTACH TO THE ENGINE HOIST IN ORDER TO LIFT HER OUT THE ENGINE WELL.

I WILL WRITE IN DOWN THIS TIME,SO I KNOW WHAT KIND TO GET.

LOOSING MY MIND CAN'T REMEMBER MY NAME SOMETIMES, THANK GOD MY WIFE SEWED IT INSIDE MY SHIRT . . . LOL

O.K. GUYS I'M IN YOUR HANDS AGAIN.

STILL ON THE FENCE ABOUT NEW OR REBUILT T5 TRANNY. I GOT MY FEELERS OUT. A GUY MY FRIEND KNOWS WORKS IN AMMOCO TRANSMISSION AND HE BUILTS 'EM ON THE SIDE.

I'M ALSO TAKING A LONG LOOOOK

AT: SUMMITT RACING SITE. THEY WANT ABOUT $1,140.00 FOR A NEW ONE. HUMMM !
WHAT DO YOU THINK ABOUT THAT GUYS

O.K. BROTHERS: NEED THE BOLT SIZE AND GRADE TO HOOK-UP MY ENGINE 2

THANK YOU ALL AGAIN AND YOU KNOW WHO YOU ARE. CAN'T THANK YOU GUYS ENOUGH FOR PUTTING UP WITH ME.

GOD BLESS YOU ALL

SCHOONER

saleen243 · 11-29-2005, 11:35 PM

Grade 8 - Ace hardware store....

SCHOONER · 12-01-2005, 04:47 PM

HEY SALEEN243

THANK YOU FOR THE INFO ON: GRADE 8 BOLTS TO LIFTS MY ENGINE OUT OF ITS WELL.

I GUESS THE LENGTH WILL BE ABOUT 2in. LONG

THANKS GUYS
GOD BLESS YOU

SCHOONER

Phillyfanfrombirth · 12-01-2005, 06:14 PM

You will need at least one inch of it threaded in the block (the more the merrier), and enough of it sticking out of the block to get a good sized washer and the chain on it... I'd say at least 1 3/4" long.

SCHOONER · 12-05-2005, 12:43 AM

HEY PHILLYFANFROMBIRTH

THANKS ~ IT WILL BE LIKE YOU SAID, ''. . . AT LEAST 1in. OF THREAD INTO THE BLOCK. THE MORE THREAD IN THE MERRIER. (like the sound of that. . . lol)

SO, I'LL GET GRADE '8' BOLTS AND 1 3/4 OR MORE LENGTH ON THE BOLT, PLUS WASHERS TO GO WITH 'EM.

THANKS PHILLY
HAPPY HOLIDAYS TO YOU AND YOURS
GOD BLESS

P.S. SUMMIT IS REALLY LOOKING BETTER AND BETTER FOR MY T5 TRANNY. THEY ARE GIVING 'FREE' SHIPPING TILL THE HOLIDAYS. THAT'S A $75 BUCK SAVINGS.

I JUST GOTA TAKE THAT LEAP OF FAITH AND DO IT 'DAM IT'
THANKS AGIAN PHILLY

SCHOONER

Phillyfanfrombirth · 12-05-2005, 10:31 AM

Call them up, and ask a technician what else you will need for the conversion... I've never done the conversion to a T-5, so I'm not sure what else will be needed... they should be able to hook you up with a kit (or let you know where to find everything) ... just have your engine and car information ready....

11-29-2005, 11:07 PM	#1
SCHOONER Registered Member Join Date: Jun 2005 Location: LAS VEGAS, NEVADA Posts: 84	Bolts: What Grade And Length ? ? ? HI GUYS GUESS WHO WELL I GOT ME ENGINE HOIST AND LEVELER. GOT MY ENGINE STAND TODAY. ALL I NEED TO KNOW IS THE SIZE BOLTS AND GRADE TO LIFT THAT SUCKER (engine) OUT MY CAR ONE OF YOU GUYS SAID SOMETHING ABOUT GETTING A GRADE 8 OR WAS IT GRADE B BOLTS TO ATTACH TO THE ENGINE HOIST IN ORDER TO LIFT HER OUT THE ENGINE WELL. I WILL WRITE IN DOWN THIS TIME,SO I KNOW WHAT KIND TO GET. LOOSING MY MIND CAN'T REMEMBER MY NAME SOMETIMES, THANK GOD MY WIFE SEWED IT INSIDE MY SHIRT . . . LOL O.K. GUYS I'M IN YOUR HANDS AGAIN. STILL ON THE FENCE ABOUT NEW OR REBUILT T5 TRANNY. I GOT MY FEELERS OUT. A GUY MY FRIEND KNOWS WORKS IN AMMOCO TRANSMISSION AND HE BUILTS 'EM ON THE SIDE. I'M ALSO TAKING A LONG LOOOOK AT: SUMMITT RACING SITE. THEY WANT ABOUT $1,140.00 FOR A NEW ONE. HUMMM ! WHAT DO YOU THINK ABOUT THAT GUYS O.K. BROTHERS: NEED THE BOLT SIZE AND GRADE TO HOOK-UP MY ENGINE 2 THANK YOU ALL AGAIN AND YOU KNOW WHO YOU ARE. CAN'T THANK YOU GUYS ENOUGH FOR PUTTING UP WITH ME. GOD BLESS YOU ALL SCHOONER

11-29-2005, 11:35 PM	#2
saleen243 Registered Member Join Date: Aug 2001 Location: VAFB, CA Posts: 47	Re: Bolts: What Grade And Length ? ? ? Grade 8 - Ace hardware store.... __________________ 2002 F150 SuperCrew 1990 5.0 LX Coupe 1989 Saleen Convertible #243 1965 Fastback - 331 Stroker/T-5 swap

12-01-2005, 04:47 PM	#3
SCHOONER Registered Member Join Date: Jun 2005 Location: LAS VEGAS, NEVADA Posts: 84	Re: Bolts: What Grade And Length ? ? ? HEY SALEEN243 THANK YOU FOR THE INFO ON: GRADE 8 BOLTS TO LIFTS MY ENGINE OUT OF ITS WELL. I GUESS THE LENGTH WILL BE ABOUT 2in. LONG THANKS GUYS GOD BLESS YOU SCHOONER

12-01-2005, 06:14 PM	#4
Phillyfanfrombirth Registered Member Join Date: Dec 2004 Location: South Central PA Posts: 358	Re: Bolts: What Grade And Length ? ? ? You will need at least one inch of it threaded in the block (the more the merrier), and enough of it sticking out of the block to get a good sized washer and the chain on it... I'd say at least 1 3/4" long.

12-05-2005, 12:43 AM	#5
SCHOONER Registered Member Join Date: Jun 2005 Location: LAS VEGAS, NEVADA Posts: 84	Re: Bolts: What Grade And Length ? ? ? HEY PHILLYFANFROMBIRTH THANKS ~ IT WILL BE LIKE YOU SAID, ''. . . AT LEAST 1in. OF THREAD INTO THE BLOCK. THE MORE THREAD IN THE MERRIER. (like the sound of that. . . lol) SO, I'LL GET GRADE '8' BOLTS AND 1 3/4 OR MORE LENGTH ON THE BOLT, PLUS WASHERS TO GO WITH 'EM. THANKS PHILLY HAPPY HOLIDAYS TO YOU AND YOURS GOD BLESS P.S. SUMMIT IS REALLY LOOKING BETTER AND BETTER FOR MY T5 TRANNY. THEY ARE GIVING 'FREE' SHIPPING TILL THE HOLIDAYS. THAT'S A $75 BUCK SAVINGS. I JUST GOTA TAKE THAT LEAP OF FAITH AND DO IT 'DAM IT' THANKS AGIAN PHILLY SCHOONER

12-05-2005, 10:31 AM	#6
Phillyfanfrombirth Registered Member Join Date: Dec 2004 Location: South Central PA Posts: 358	Re: Bolts: What Grade And Length ? ? ? Call them up, and ask a technician what else you will need for the conversion... I've never done the conversion to a T-5, so I'm not sure what else will be needed... they should be able to hook you up with a kit (or let you know where to find everything) ... just have your engine and car information ready....