Boss Pistons For 347 Stroker

Ford_Racer_1 · 09-09-2002, 03:56 PM

Does anyone know of a manufactuer that makes a set of pistons to use on a 347 stroker with Boss Heads. I have a standard 302 roller block that I am stroking to 347. I also have a set of Boss Heads that I would like to use on this engine, but I am having trouble finding pistons compatible with the boss heads. Any help would be greatly appreciated.

todd95GT · 09-09-2002, 04:18 PM

I've never seen any advertisment for such. What's the difference in the chambers or design on the Boss heads?
I'm assuming you want an off-the-shelf slug to keep the cost reasonable, otherwise I'm sure JE, Wiseco, etc. could forge you some.

Smokedawg · 09-09-2002, 05:29 PM

What size are the valves on those heads.

A lot of companies make pistons for 347's...Ross, SRP, JE..etc..

The Deuce · 09-09-2002, 05:39 PM

You might be able to get someone to make you rods and use the Boss pistons.

Someone smarter than me consider this. What about 351C rods with the 302 piston?

Anything can be done with enough money. Just throwing out ideas as I lose my mind.

09-09-2002, 03:56 PM	#1
Ford_Racer_1 Registered Member Join Date: Sep 2002 Location: Georgia Posts: 4	Boss Pistons For 347 Stroker Does anyone know of a manufactuer that makes a set of pistons to use on a 347 stroker with Boss Heads. I have a standard 302 roller block that I am stroking to 347. I also have a set of Boss Heads that I would like to use on this engine, but I am having trouble finding pistons compatible with the boss heads. Any help would be greatly appreciated.

09-09-2002, 04:18 PM	#2
todd95GT Registered Member Join Date: Aug 2001 Location: Palm Beach Gardens, Florida, USA Posts: 191	I've never seen any advertisment for such. What's the difference in the chambers or design on the Boss heads? I'm assuming you want an off-the-shelf slug to keep the cost reasonable, otherwise I'm sure JE, Wiseco, etc. could forge you some. __________________ Todd

09-09-2002, 05:29 PM	#3
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	What size are the valves on those heads. A lot of companies make pistons for 347's...Ross, SRP, JE..etc.. __________________ 1990 Mustang GT- 347 Stroker-Tremec 3550-Compucar Nitrous, AFR, Systemax Intake, AFM, 30lbers, 70MM TB, 76mm MAF, full suspension and lots more 1995 Chevy S-10 406 SBC, Dual tunnel ram, Dart heads, Nitrous, full tub, 4-link, adjustable drag shocks, coil-overs, 9in rearend, 4.56 gears...etc

09-09-2002, 05:39 PM	#4
The Deuce Registered Member Join Date: Apr 2002 Location: Atlanta, GA Posts: 2,325	You might be able to get someone to make you rods and use the Boss pistons. Someone smarter than me consider this. What about 351C rods with the 302 piston? Anything can be done with enough money. Just throwing out ideas as I lose my mind. __________________ 1997 Mustang GT "The Freak" - 13.80 @ 101.70, 2.07 60' 1995 Honda VFR750 - not much @ really fast (actual data pending.) 1964.5 Mustang 289 Rice Haters Club Member #13

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BOSS pistons ??	PONYnx86	Windsor Power	5	08-10-2004 10:36 AM
Stroker Pistons	bottlebaby91	Windsor Power	6	02-20-2004 06:14 PM
Blown Stroker Computer Help	RabidPony	Modular Madness	10	02-07-2004 11:56 PM
Pistons for Larger Valves?	MustangChile	Classic Mustangs	4	02-28-2003 01:27 AM
Overated BOSS Mustangs?	Sac68	Blue Oval Lounge	43	03-01-2001 05:20 PM