

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: Sep 2002
Posts: 14
|
![]() I need some help finding a cam.
What I have is a stock 390 in my Mach 1. I bought an edelbrock performer intake, and Hooker headers. I will be running 2 1/2 inch exhaust. What I need is to find a cam that I can install without having clearance problems. I don't care about idle or gas mileage. I'm just looking to spice up this motor a little, till my windor is done. If it helps, I bracket/street race.. ![]()
__________________
Father/Son Racing 03 Cobra 2.80 pulley Bassani exhaust Autologic chip UPR CAI Pro 5.0 shifter Boost by-pass NGK TR6 11'sec daily driver, on radials 69 MACH1 390 C6 4:11 |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Sep 1999
Location: Vancouver, WA USA
Posts: 439
|
![]() Why not do the same thing I did. I called Comp Cams, discussed my combination and let them recommend the cam. Work out for me. Car got a lot quicker.
Ron
__________________
65 Mustang Fastback 347 Stroker, C4 with 4.56 10.68 @ 122 N/A 9.74 @ 137 w/ N2O www.fastspecialties.com |
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Apr 2002
Location: somewhere outside of nowhere
Posts: 82
|
![]() what Ron said.
__________________
Be very very quit, I'm hunt'n wabbit. |
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Sep 2002
Posts: 14
|
![]() Thanks guys, I called them today, looks like I will be running the High Energy 268H Series, is anyone else running this cam??
__________________
Father/Son Racing 03 Cobra 2.80 pulley Bassani exhaust Autologic chip UPR CAI Pro 5.0 shifter Boost by-pass NGK TR6 11'sec daily driver, on radials 69 MACH1 390 C6 4:11 |
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Nov 1998
Location: Houston, Tx.
Posts: 3,887
|
![]() That's what I run in my street driven moderately modified 306 / C-4 / 3.25 combo. It's just right for me. I do run 1.7 roller rockers though to give a little extra valve lift (.486 vs .456). Good pwer from idle to 6000 RPM with a standard Edelbrock Performer intake and a 625 Road Demon and Tri-Y headers, 3 chamber Flows, 2.5" exhaust..
Rev
__________________
'66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe |
![]() |
![]() |
![]() |
|
|