O.K., Since I posted this I have found sites that sell the kits, too bad I like to play around with stuff. The reason I used the other tank is bacause of the extra gas it dumps into the system. You can leave trails of flame this way!!!!!!!! The wires I got from Auto Zone, I asked them what the longest wires they had and they sold me some from I believe from a Chystler. If that doesent work you talk to like Summit, and they can make you the wires. It cost me around 30 bucks for the two. The coils were switched so it was not a drain on the battery, because my friend only flipped the swicth to get the flames. The distance is very important. because I played with it and sometimes it worked better. The plugs also made a difference, The best I found were for Kerosin(sp). regular spark plugs did work but speraticly. You can do it with out the extra gas tank but when I did it for my friend I did not want to risk blowing a 12 gallon tank to a 1 gallon tank. It is a week end project, because it takes time to get it right. I am not a safe person so I took risk. It payed off, but in the flame world there are many tricks and many people I talked to would not tell me them. I, after looking at a few sites would just buy a kit. My friends 65 was crap so we both did not really care about playing with it. Sorry about misspellings, drank way too much. But if you still need help give me a reply and I will do my best to help you. The kits I saw cost like 130.00, I payed more than that to do it to my friends stang. Brock
|