© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
03-01-2001, 06:18 PM | #1 |
Registered Member
Join Date: Feb 2001
Location: Stockton, Ca
Posts: 599
|
What Do You Think?
Anyone think I can produce 300+ hp and still get more than 15 mpg in my 67' coupe with about $2000 bucks? I did it but it cost more in the fastback. What does everyone else have under their hood and whats your gas milage? I'll keep you up dated as the engine build goes. I already have the parts and the block machined. Just a matter of time. It's great not to worry about rims and paint jobs because you have extra cash to dump into the engine.
------------------ 67' coupe under construction trying to make a 300+ hp engine under $2000 looking good with new parts of course 84'turbo charged svo 70'Torino almost same mods as fastback 67'fastback- Edelbrock carb, intake, cam, valve springs. Road lifters, Comp Cam rocker arms, windage tray, cerama coated headers, dual flows with H-pipe, modded c-4, tci stall converter, perma cool electric fan, aluminum water pump, griffen aluminum radiator, accel 8.8 cable, wide cap distriburator, magnetic pick up, [This message has been edited by Fostang (edited 03-01-2001).] |
03-01-2001, 08:15 PM | #2 |
Registered Member
Join Date: Apr 2000
Posts: 102
|
its possible to get 300 horsepower but the problem is gonna be with the 15mpg. Are you planning on running a c-4, toploader, t-5 or what?
|
03-01-2001, 11:15 PM | #3 |
Registered Member
Join Date: Feb 2001
Location: Stockton, Ca
Posts: 599
|
modded c4.....bearings instead of bushings in the right spots.
|
03-01-2001, 11:26 PM | #4 |
Registered Member
Join Date: Apr 2000
Posts: 102
|
nope theres no way you get 15 mpg out of it with 300 horsepower, not with a c-4 atleast.
|
03-01-2001, 11:27 PM | #5 |
Registered Member
Join Date: Apr 2000
Posts: 102
|
now i have seen a 67 or 68 i cant remember have 500 horsepower with a supercharger and still get 20 mph, But he had a t-5 behind it i believe.
|
03-02-2001, 06:44 AM | #6 |
IRAQ VET
Join Date: Feb 2000
Location: high desert California
Posts: 1,480
|
Good luck i hope u can do it. It will be very hard with the c-4 though. U will be doing alot better than me though i only get about 4-6 mpg.
------------------ 69 428 cobra jet: tons of mods. 97 f-150 5.4 xlt mark III BUCKLE UP. SUCK IT IN. Objects in the mirror are about to disappear... QUICKLY!!!!!! |
03-02-2001, 12:58 PM | #7 |
Registered Member
Join Date: Feb 2001
Location: Stockton, Ca
Posts: 599
|
I've done it in the fastback but it took too many head aches to acomplish. I'll keep you informed on how the build goes. Should be done in a couple of weeks ready for the dyno pull. But with cars you never know!
|
03-04-2001, 09:21 PM | #8 |
Registered Member
Join Date: Feb 2001
Location: Stockton, Ca
Posts: 599
|
Going good the rain forced me to remain indoors this weekend. Therefore I got a lot acomplished. Bearings, freeze plugs, crankshaft, camshaft, and 4 pistons are on. Everything is looking good.
------------------ 67'fastback- Edelbrock carb, intake, cam, valve springs. Road lifters, Comp Cam rocker arms, windage tray, cerama coated headers, dual flows with H-pipe, modded c-4, tci stall converter, perma cool electric fan, aluminum water pump, griffen aluminum radiator, accel 8.8 cable, wide cap distriburator, magnetic pick up, manley valves, v-matic hurst shifter, edelbrock performer nitrous, carter electric fuel pump, ignitor coil, solid motor mounts, magna racing suspension, poly urathane bushings, und |
03-04-2001, 09:37 PM | #9 |
Registered Member
Join Date: Sep 2000
Location: Dacula, GA
Posts: 73
|
The only way I can think of to get 15mpg and 300+hp with that combination is nitrous oxide, but then of course you wouldn't have 300hp all the time, only for short bursts. Sacrifice the gas mileage - go for speed! I get 11mpg in my 351C 4sp 69 with mixed driving and a not-so-light foot.
------------------ Neal 69 stang 351C/4sp |
03-07-2001, 04:01 PM | #10 |
Registered Member
Join Date: Feb 2001
Location: Stockton, Ca
Posts: 599
|
The rest of the pison's are in now! Double roller timing chain and oil pump also. Ahh it smells so nice to open boxes stuffed with goodies.
------------------ 67'fastback- Edelbrock carb, intake, cam, valve springs. Road lifters, Comp Cam rocker arms, windage tray, cerama coated headers, dual flows with H-pipe, modded c-4, tci stall converter, perma cool electric fan, aluminum water pump, griffen aluminum radiator, accel 8.8 cable, wide cap distriburator, magnetic pick up, manley valves, v-matic hurst shifter, edelbrock performer nitrous, carter electric fuel pump, ignitor coil, solid motor mounts, magna racing suspension, poly urathane bushings, und |
03-08-2001, 01:11 PM | #11 |
Undescribable
Join Date: Sep 1998
Location: Ft Myers Fla
Posts: 1,539
|
i think you should be able to do both, 15 mpg isn't that hard to make, just have to do a bit of tuning once u get it back running and u should make it.
------------------ 93-LX: 5 Speed, Flow's with H-Pipe, 3.73's Sub's and K&N. |
03-08-2001, 02:10 PM | #12 |
Registered Member
Join Date: Nov 1998
Location: Houston, Tx.
Posts: 3,887
|
Fostang, I only get 12.5-13 mpg in my '66 coupe with a C-4 and with a 3.25 axle. That's with a 306 and 300 hp. Cruises about 3000 rpm at 70 mph. I have my carb set up mostly for performance (jets, srings, etc.). I have gotten as much as 14-14.5 mpg, but with different carb set up biased towards economy. I just want max performance and screw mpg. I, personally, am willing to give up some economy for a little lower E.T.
Rev ------------------ '66 Coupe, 306, 300 HP, C-4, 13.97 e.t., 100.3 mph 1/4 mi. |
03-08-2001, 05:05 PM | #13 |
Registered Member
Join Date: Feb 2001
Location: Stockton, Ca
Posts: 599
|
I'm going to be using an edelbrock 600 cfm carburator. Checked piston deck clearance came out to be .005-inch below the deck surface with the 60 cc chambers on heads should be 9.0:1 compression. Installed the world dart 2 windsor heads also.
|
03-12-2001, 03:54 PM | #14 |
Registered Member
Join Date: Feb 2001
Location: Stockton, Ca
Posts: 599
|
Got the lifters, pushrods, roller rocker arms, and oil pan in. Yup everything is looking excellent. Almost done!
------------------ 67'fastback- Edelbrock carb, intake, cam, valve springs. Road lifters, Comp Cam rocker arms, windage tray, cerama coated headers, dual flows with H-pipe, modded c-4, tci stall converter, perma cool electric fan, aluminum water pump, griffen aluminum radiator, accel 8.8 cable, wide cap distriburator, magnetic pick up, manley valves, v-matic hurst shifter, edelbrock performer nitrous, carter electric fuel pump, ignitor coil, solid motor mounts, magna racing suspension, poly urathane bushings, und |
|
|