Have you torqued it(the nut) down to see if it will slide back any further? I dont know what the spec on that should be, but if you use the nut to press it back, in theory it should go back to the correct depth.
Hope this helps,
J
__________________
____________
'66 Mustang Coupe- AKA "Lenore" *on disability for a (long) bit*
'93 GT Mostly stock AKA "Fawkes"
Rice Haters Club Member #239
"I find your lack of faith...disturbing."
"Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats." H. L. Mencken
|