![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
![]() |
#1 |
Registered Member
Join Date: Nov 2000
Posts: 290
|
![]() I know I'm wearing out my welcome on brake line questions so hopefully this'll be the last one. Got all new lines and master cylinder hooked up and all 4 brakes bled beautifully. However, of the 20 connections for my 68 coupe (includes the 4 bleeder screws), I had 6 major leaks. Retightened them and am down to 3 minor leaks. My question is how much more can I retighten the fittings before I tear something up? I know the manuals say definitely don't overtighten but they also say to get tight enough to stop the leak. Have been tightening each time about an 1/8th of a turn to try and stop the leaks.
|
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: May 1999
Location: Rowlett,Texas
Posts: 306
|
![]() The easiest thing I can suggest is loosen them, make sure the line is going straight into the fitting (sometimes this means bending the line a little) and while keeping it straight retighten the line and if you are usinf a flare nut wrench bear down on it pretty good.
If this does not work than chances are you have a flaw on the end of the tube or the fitting it attaches too. Either way you will have to take off the line and clean up the mating surface with a piece of emery cloth.
__________________
69 393W Sportsroof deluxe |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
brake question | 69mach351 | Classic Mustangs | 6 | 08-12-2002 10:10 PM |
Rear Brake Line Removal | Kisner | Classic Mustangs | 2 | 03-13-2002 12:31 PM |
Emergency brake cable question | 82 GT | Windsor Power | 1 | 07-16-2001 03:56 PM |
Trans brake, line brake....... | dinomite | Windsor Power | 1 | 04-17-2001 10:36 PM |
Brake line question | H'YAMULE | Classic Mustangs | 2 | 03-19-2001 11:58 AM |