MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Classic Mustangs (http://forums.mustangworks.com/forumdisplay.php?f=10)
-   -   How much HP? (http://forums.mustangworks.com/showthread.php?t=7786)

Maxout 04-15-2000 02:21 PM

How much HP?
 
Can anyone tell me what the Horsepower of a stock 1979 351 Windsor is? What are the value sizes and compesion ratios? Thanks,,,

Rev 04-16-2000 11:52 AM

By 1979 we were at about the worst of the smog era engines. I had a 1975 Granada with a 351 W. Mine came witha 2 barrel, had an EGR valve, smog (air) pump and small valves in the heads. I think these valves were 1.72/ 1.45 , but don't quote me on this. Compression ratio was about 8/1. This produced about 165 hp @ 4000 and 276 lb/ft at 2000. Not exactly what one would call a high performance engine. With the right mods , a 351 W can be made to produce lots of power. Just look at the Ford crate engine with 385 hp.

Rev

------------------
'66 Coupe, 306, windage
tray, TRW flat tops, 351W
heads,pocket ported, 268
CC hydraulic cam, R tip
R's, Edelbrock Performer,
600 CFM Holley vac. secs.,
Mallory Unilite, coil, fuel
pump, Tri-Y headers, 2 1/2 "
custom pipes, 3 chamber
Flows, stock C-4, 3.25
Currie built 8" rear,
March under drive pulleys,
13.97 e.t., 100.1 mph
1/4 mi.


All times are GMT -5. The time now is 08:20 AM.