[Gearhead999]

All depends on your mechanical knowledge. Either of the two regulators aren't "Hard" if you are mechanical. But, if you aren't....they're hard.

Get a shop manual if you don't know.

To get to the rear, 1/4 window:

1] Pop seat bottom out, from front of seat bottom
2] Take the rear seat back out, two screws holding at bottom near seat belts.
3] Remove window crank.
4] Remove door sill plate
5] Remove windlace
6] Remove 1/4 trim panel, couple screws, clips, etc.
7] Remove and replace regulator assy.