MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Classic Mustangs
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 01-30-2002, 01:39 PM   #1
Kisner
Registered Member
 
Join Date: Nov 2000
Posts: 290
Default Help - Brake Fluid Leaking

Walked into garage yesterday to crank my 68 coupe restoration project and noticed brake fluid leaking pretty severely from behind the rear driver-side wheel. Looked everywhere I could see from underneath but can't find where fluid is leaking from. It's running down inside of wheel underneath. Did I break a brake line or could I have a connection loose? Haven't taken the wheel off yet. Any tips on where or what to look for?
Kisner is offline   Reply With Quote
Old 01-30-2002, 03:09 PM   #2
73 Mustang Boy
Registered Member
 
Join Date: Aug 2001
Location: Georgia
Posts: 84
Default

You probably have a wheel cylinder bad. When you take the brake drum off look between the brake pads at the top, htere is a littlie round cylinder that the brake line runs into that is probably your problem. They only cost about 12-15 dollars for rebuilt ones and are fairly easy to change.
__________________
73 coupe, 351W, GT-40 heads, edlebrock 750, offenhauser intake, .488 lift cam, 2.5 exhaust, 2 chamber flowmasters, blah, blah, blah...
73 Mustang Boy is offline   Reply With Quote
Old 01-31-2002, 12:07 AM   #3
Frankenstang65
Registered Member
 
Frankenstang65's Avatar
 
Join Date: Sep 2001
Location: Seattle, WA
Posts: 79
Default

If there is fluid all over the wheel and lower part of the tire, then I'd put my money on a leaky wheel cylinder as well. All that is inside those things is a spring and two dime-sized rubber plungers. If you're familiar with chaning shoes on drum brakes it's a snap.
You can hone them out yourself and just replace the guts if you want, but I too would recomend getting all new parts. Don't forget to bleed the brakes when you got her all back together.
__________________
1965 Coupe: 351W, comp cam, Aluminum Systemax II heads (2.02/1.60), 1.7 Cobra full roller rockers, Edelbrock intake, Holley 650 double pumper, Mallory Unilite, MSD-6AL, MSD Blaster 2 coil, MSD heli-core plug wires, Hedman headers, 2 1/2" exhaust (GT style) w/ 40 series delta flows, 69 C4 w/ shift kit, shelby traction bars, 3.55:1 rear

Daily Driver:
1989 GT- 5spd, K&N (no silencer), Shorty Headers, King Cobra Clutch, Flowmaster Force II Cat-back
Frankenstang65 is offline   Reply With Quote
Old 01-31-2002, 12:46 PM   #4
Kisner
Registered Member
 
Join Date: Nov 2000
Posts: 290
Default

Thanks a million guys - doesn't sound like anything devastating. Nope, never changed any brakes before (pretty knowledgeable about bodywork but not much mechanical) but I have a friend who's an expert Ford mechanic. Will see if AutoZone carries the wheel cylinder and buy my bud a 6-pack to change out for me.
Kisner is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
leaking tranny fluid GhettoPop Windsor Power 5 01-13-2004 07:57 PM
Yet another tranny fluid ?? Simi Stang Windsor Power 4 09-30-2003 12:44 PM
Leaking transmission fluid esandes Modular Madness 0 12-18-2002 06:16 PM
Mustang 2000 Rear Disk Brake Repairs JerryR Modular Madness 11 10-22-2002 09:08 AM
brake fluid drain back Fostang Classic Mustangs 0 06-01-2002 10:42 PM


All times are GMT -5. The time now is 05:51 AM.


SEARCH